Back Support Cushion
Accu-Back Adjustable Lumbar Roll
The Accu-Back Adjustable Lumbar Roll is designed for use by individuals with lower back pain, injury, or arthritis. This device is a half lumbar roll measuring 5 x 11 x 2 - ½ inches. Additionally, it relieves neck and back pains as well as sitting discomfort. It is hypo-allergenic stain resistant.
Accu-Back Back Supports
The Accu-Back Back Supports are a portable back support cushions made of fire-retardant fabric and temper foam. Twelve models are available: an executive model has two vertical lumbar pads and shoulder rest, deluxe executive includes a seat pad in single unit, economy pillow back has back rest with single horizontal lumbar support, deluxe includes shoulder rest. Also 3 models with no additional parts needed. COLOR: Variety.
Adjustable Side Support Lumbar Cushion
The adjustable side support lumbar cushion designed to improve posture and reduce stress on the lower back. This cushion is firm and supportive, this cushion and positions users body in an ergonomic position. Has supportive side arms to keep users body stable and upright. Helps prevent users from slouching. Features an adjustable band and arms so the user can customize the comfort level. Can be used in an office chair, reading chair or car seat
Alleviate Support System (Model 99444)
The Alleviate Support System, model 99444, is an arm and back support designed for use by dentists and dental assistants to prevent upper extremity injuries. The purpose is to relieve and reduce the occurrence of musculoskeletal pain and localized fatigue caused by excess weight placed on the shoulders when one or both arms are elevated away from the body during dental procedures. The unit includes a pair of gel elbow rests to provide comfort and support while absorbing vibration from instrument
Anna-Dote is a back support cushion and solid back insert designed to aid individuals who use wheelchairs, or straight-back/recliner geriatric chairs to sit upright, allowing for the reduction in stress, discomfort and fatigue that can accompany a slouched to the side position. This positioning supportive aid fits over the backrest of either a wheelchair or a geriatric chair and provides patients with an extended backrest to keep them upright and prevent falling or sliding to the side of the cha
At Ease Contour Lumbar Support (Models L250 & L500)
The At Ease Contour Lumbar Support, models L250 and L500, is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. An orthopedic design relieves tension and supports the spine. It is made of molded high resilient urethane foam and the removeable cover is made of washable polyester. The strap in the b
At Ease Half Roll Lumbar Support & Full Roll Lumbar Support (Model L50 & L100)
The At Ease Half Roll Lumbar Support and Full Roll Lumbar Support, models L50 and L100 is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. The polyurethane foam is comfortable and has excellent recovery. The durable polyester cover is removable and washable. The elastic strap is designed to fit
This Back Huggar is a contoured cushion designed for individuals with back pain, spinal pain, illness or disability to provide rigid support and help alleviate lower back fatigue. Features an insert which can be removed by those who want to reduce the product depth or modify the lumbar curve. Promotes good posture and correct spinal alignment. Comes with an elesticised strap enabling attachment to car seat or chair. Portable and lightweight so it can be used on any chair, removable cover for cle
Back Jack (Models Bj-M & Bj-Xl)
The Back Jack is a back support cushion designed to provide support when sitting on the floor. All models feature a slightly reclined back and a wedge seat. They have a steel frame with a foam seat pad and a canvas cover. SIZES: Medium (BJ-M) or extra-large (BJ-XL). DIMENSIONS (HxDxW): 20 x 11 x 14 (medium) or 21.5 x 12.5 x 16 x 12.5 (extra large).
Back Pain Wedge
Back Rest, Sport Seat, & Seat Rest Self-Inflating Cushions
Open cell foam back rest with airtight, waterproof nylon shell. Self inflates; valve to adjust user's comfort. Size 16 by 8 by 2.5 inches; blue, cedar brown covers available. Also available: Seat Rest, similar product for seat of chair, size 12 by 16 by 1.5 inches; price $65.00; Sport Seat, like Seat Rest except heavier duty covering, in navy, rust, or green.
Back Support (Model Ha-4785)
Back Support, model HA-4785, is a foam back support cushion designed for use by individuals who need extra back support. Formed from deeply contoured foam, this support cushion adds extra comfort. It has a washable cover and elastic straps to fit and secure it to most chairs. DIMENSIONS (HxLxW): 120 x 400 x 330 millimeters. WEIGHT: 800 grams.
The Back Vitalizer is an inflatable back support cushion designed for use by individuals with lower back pain or individuals who sit for long periods. This back support device produces a gentle and on-going stimulating motion. By controlling the level of inflation, the user can control the level of exercise or support. Its aero-dynamic structure is adjustable to suit individual needs. The device helps to relieve and prevent stiffness, fatigue and pain in the lower back, shoulder and neck. It als
The Back-A-Line Belt is a curved lumbar belt designed for individuals with lower extremity disabilities or back pain. The belt is designed to be a curved lumbar pad and is intended to improve the user’s posture at a subconscious level, which is the only way to reduce back pain or prevent future injury. Its non-stretch design eliminates the risk of muscle weakening, a concern with other back belts. Designed to combat the actual cause of back injury — poor posture rather than addressing only the s
The Back-Huggar is a back support pillow designed for use by individuals with back pain or injury. It is constructed of polyurethane foam with a cloth, hand-sewn cover with a zipper. The Back-Huggar is available in four styles: Standard fits most straight back chairs and auto bench seats; Bucket Seat for designed for auto bucket seats and cureved back chairs; Secretary for open back chairs; and Extra Wide for wider backs. Elastic straps for attaching support to seats and chairs are available; t
Bassett Lumbar Support
The Bassett Lumbar Support is a back support designed for those individuals with back pain to provide lumbar support assisting with relief of pain. Works with the spines natural curvature. Can be used in the car, office, lounge, etc. Allows air circulation, prevents perspiration. Light weight - easy to carry.
The BedLounge is a back support cushion designed for use by individuals with physical disabilities. Resembling a chair without a seat, this large cushion enables the user to sit upright in bed and provides support for the upper and lower back, arms, shoulders, neck, and head while the user reads or watches television. This padded support has a lightweight internal polypropylene frame and features pivoting armrests and a height- and angle-adjustable headrest pillow. Storage pockets on the armrest
Betterback Seat Support
The BetterBack a portable seat is a self-supporting unit that can easily be carried and used anywhere. The BetterBack provides a comforting, natural back support and was designed to prevent slouching while maintaining a neutral spine position. Its contoured wood shape keeps the integrity of the seat and back components independent of the surface on which the user places it. The seat also helps users maintain a comfortable, anatomically correct sitting position. DIMENSIONS: 15.5 inches depth x 13
Body Ryzm Jazz Rx Seat Cushion
JazzRX is a clinically designed back cushion meant to help reduce the health risks of sitting still, prevent "C" curve in the back and improve spinal alignment. It helps reduce back pain during long periods of sitting whether in car, airplane or at work and home. DIMENSIONS: 16 inches length x 0.5 inches height x 16 inches width inches. WEIGHT: 1.1 pounds. COLOR: Black.
WARRANTY/GUARANTEE: 3-year, 100 percent performance guarantee.
Body Ryzm Samba Rx Seat Cushion
The Samba RX is an ergonomic seat meant for periods of endurance sitting. The cushion is meant to provide increased lumbar and lower back support. DIMENSIONS: 18 inches height x 15 inches width x 0.5 inches depth. WEIGHT: 1 pound.
COLOR: Black. WARRANTY/GUARANTEE: As stated by the manufacturer.
Bodyline Back-Huggar Thin Bucket Seat Back Cushion
The Bodyline Back-Huggar Thin Bucket Seat Back Cushion is designed for use by individuals in need of additional lower back support. The anatomical design provides back pain relief. The support works laterally and vertically providing spine support.
The Boundary Chair is a comfortable seat cushion designed for children ages 3 through 10 years old with disabilities to encourage awareness of personal space. The 5-inch back and sides create a soft, flexible wall that provides tactile feedback. Creates structured seating area for wiggly bottoms to reduce disruption in the classroom. Surface wash. Air dry. Filled with PVC pellets.
Bucketseat Lumbar Cushion
The Bucketseat Lumbar Cushion is a back support cushion designed to fit snugly against bucket seats to provide lumbar support and promote proper seating posture. Made of molded foam, the cushion has contoured edges and is available with or without a securement strap. DIMENSIONS: 15 x 13.5 inches. COLOR: Blue, burgundy, beige, or grey.
Carbon Series Back Support
The Carbon Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. The unit consists of a carbon shell, cushion and cover. It has an active support contour of 2.5 inches. The unit is compatible with Fixed Elite, 2-Point Pro and Quick Release mounting systems. The fixed positioning unit clamps to 1-inch tubing; all other tubing sizes require spacers. The adjustable positioning unit clamps to 0.6- through 1-inch tubing, rou
Comfy-Back Bacpac (Model 400)
Lumbar cushion which includes reusable hot or cold pack. Gel pack is microwave heated, or frozen and then inserted under fabric flap with Velcro closures. .
Comfy-Back I (Model 100)
Back support provides extra-firm lumbar support. Fabricated of high density foam. Half-rounded cushion attaches to any seat back with adjustable 3/4 inch non-roll elastic. 15 inches long by 3 inches wide by 5 inches high. Nylon covers have zip closure. Washable. Colors available.
Comfy-Back Ii (Model 200)
Back support with angled coccyx support. Adjustable. Vinyl hinge tilts spine upward and pulls half round lumbar cushion into lower back. Lumbar cushion is Velcro-backed. Attaches to any seat with adjustable 3/ 4 inch elastic. 15 inches long x 5 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.
Comfy-Back Iii (Model 300)
Seat and back support with half-rounded cushion attached to back and wedge-shaped square seat. 15 inches long by 15 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.
Comfy-Back Jr (Model 500)
Back support. Two half round cushions are hinged open for customized lower back support. One half is firm, other soft. Can close to form round cervical roll for back or neck. Fabricated of polyurethane foam. Nylon covers have zip closure. Washable. Attaches to any seat with adjustable 3/4 inch elastic. Dimensions: 12 inches long by 3 inches wide by 11 inches high. Has 6 inch diameter when closed. Colors available.
The Compu-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, this cushion is specially designed for use while using a computer. Features include a wedge-shaped design to tilt the pelvis forward, a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable velour cover. DIMENSIONS: 13 x 16 inches. COLOR: The cover is black. WARRANTY: One-year lim
Contour Back Cushion
The Contour Back Cushion is a back support cushion designed for use by individuals with arthritis. Its orthopedic contour shape allows for a correct sitting position, minimizing lower back discomfort. The molded foam rubber cushion comes with a removable cover. DIMENSIONS (HxDxW): 14.25 x 4.5 x 13 inches.
Contour Freedom Back Support Cushion
The Contour Freedom Back Support Cushion is back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is designed to fit the curve of the back and features a full-length back support with 10 zones for alignment and support in any chair. The tapered top supports upper back and shoulder blades to allow upper body movement and the contoured bottom eliminates pressure from tailbone and hips. A
Contoursleep Bed Wedge System
The ContourSleep Bed Wedge System is a total sleep and relaxation system reducing pressure on the spine, relieving muscle tension and reducing stress on the heart. OPTIONS: Optional cervical pillow. (Not included in the system). COLOR: Cream. WARRANTY/GUARANTEE: As stated by the manufacturer.
Cushion Premium Back Support
The Cushion Premium Back Support is designed for those individuals with a back pain to support curve of the lower spine and to promote healthy posture. Ideal for people who sit for long periods. Suitable for usage in the home, car or office.
Custom Lumnar Pillow
This custom lumbar cushion is an especially made-to-order lumbar pillow designed to help individuals who have a disability or condition that affects their lower back. Lumbar cushions are made to support the lumbar vertebrae, L1 to L5 of the spine. Non-returnable.
Doodlebug Insert (Model 1065)
The Doodlebug Insert, model 1065, is a back support cushion designed for use with Kay Kinder Chairs (see separate entry, as well as other positioning chairs and high chairs. This terry cloth covered foam support also reduces the width and depth of the chair, enabling it to be used by smaller children. The cover can be unzipped and remove for washing. COLOR: Red or light blue.
Dyna-Disc Balance Cushion
The DynaDisc is an inflatable balance cushion capable of withstanding 2000lbs/sq. inch, designed for those who require additional balance and/or trunk support. It's smooth on one side and textured with pegs on the other. Use DynaDisc seated to increase balance and muscular resistance while doing exercises, or lying to improve strength and core stabilization for floor exercises.
E Z Back System (Models Ezl2001, Ezl2002, & Ezl2003)
The E Z Back System, models EZL2001, EZL2002, and EZL2003, is a back support that can be mounted on sling back wheelchairs, commodes, driver or automobile passenger seats, or chairs. The system includes two laterals, a Velcro back, and a front panel with lumbar support. The system's lateral supports are independent of one another, so they are interchangeable from side to side. The system's lumbar support is also adjustable, so the system can give the user needed lateral or pelvic support. OPTION
Evolution Back is a wheelchair back support system designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. The system is adjustable to accommodate growth and its "slide and snap" hardware is operable with one hand. It has an oversized self-inflating cushion for immersion of bony prominences, and is designed to work with lateral supports, hip belts, and hip guides. The system includes hardware with one inch of lateral a
Evolution Back Deep
Evolution Back Deep is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. It provides full posterior support and up to seven inches of lateral support. The seat can be adjusted in depth plus or minus three inches (up to 17.5 degrees of recline), and can be adjusted laterally plus or minus one inch at four points to accommodate growth or disproportionate body types. The system includes a PSIS
Ez 2 Rest
The EZ 2 Rest pillow is a lumbar support pillow designed for use in office or car. Helps support spine and maintain good posture while seated. Includes a 4"x8" gel pack. Warm it in the microwave or chill it in the freezer then slip it in the pillow's pocket. Hot or cold therapy can help ease tension, reduce inflammation and relax muscles. Adjustable elastic strap fits around most any chair.
The Fastback is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. This air and foam flotation cushion is comprised of three densities of foam, positioned according to density to provide mild lateral support, scapular contour, and vertebral comfort and pressure relief. A valve allows the user to release more air for greater envelopment and stability. Other features include a PSIS block for l
The Gerimate Bolster is a back support cushion designed to offer support and comfort for persons using Geri-chairs. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.
Healthy Back Deluxe Lumbar Support
The Healthy Back Deluxe Lumbar Support is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Designed to provide support to the lumbar area and spinal column, this cushion is made of a 100-percent molded open-cell memory foam that molds to individual body curves and contours. Other features include a hugging wing-like design that provides added comfort and stability. The cushion can be used fo
Homedics Adjustable Lumbar Cushion (Model Lc-1)
The Homedics Adjustable Lumbar Cushion, LC-1, is a back support cushion designed to fit virtually any size back and to help alleviate back ache and strain. The cushion will adapt to any seating configuration and can be used at home, in the office or car. DIMENSIONS: 18 x 9 inches.
Invacare Curved Back & Invacare Pneumatic Curved Back
The Invacare Curved Back is a back support cushion for use with wheelchairs. Designed for users who require a solid back support, it features both comfort and visco-elastic foam and a built-in sacral positioning pad. The Invacare Pneumatic Curved Back includes a pneumatic lumbar support bladder. OPTIONS: Lateral supports, neck supports, and shoulder supports.
Invacare Infinity Dualflex Back
The Invacare Infinity DualFlex Backis a back support cushion designed for use in wheelchairs. A biangular flex hinge between the thoracic and sacral support panels provides precise adjustment of the back support shape. This allows for natural thoracic extension and balancing for users who require a higher level of back support. The dynamic flex feature also provides ease of upper body mobility as well as support and pelvic stability. OPTIONS: A range of accessories is available.
Invacare Infinity Loback
The Invacare Infinity LoBack is a back support cushion designed for use in wheelchairs. This adjustable back cushion features integral lateral supports and provides support to the lower pelvis while supporting the upper body range of motion. OPTIONS: A range of accessories is available.
Invacare Infinity Uniback & Invacare Infinity Uniback Foam-In-Place
The Invacare Infinity UniBack and the Invacare Infinity Uniback Foam-In-Place are back support cushions designed for use in wheelchairs. These cushions are single-panel back supports that offer economical versatility. Pelvic stabilizers and thoracic laterals are independently angle- and width-adjustable to accommodate a range of body shapes, as well as growth or change. OPTIONS: A range of accessories is available.
Invacare Personal Back & Personal Back Plus
The Invacare Personal Back is a back support cushion designed for use with wheelchairs. This lightweight back support provides comfort and positioning with built-in lumbar and lateral supports. The Personal Back Plus offers the same features plus increased lateral depth for additional stability and support. The back can be mounted in front of or behind the rear canes or at a reclined angle.
The Invacare S-Back is a back support cushion designed for use with wheelchairs. This system adjusts to the shape of the user's spine with the turn of a knob and the curve can be adjusted throughout the day for different activities. Special mounting clips enable this support to be attached and removed from sling upholstery and permit height adjustment.
Invacare Ulti-Mate Air & Ulti-Mate Air Pneumatic
The Invacare Ulti-Mate Air is a back supportcushion designed for use with wheelchairs. This back is anthropometrically contoured to promote good support and positioning of the spine. The seat-to-back angle can be adjusted from 90 to 115 degrees of recline. Quick-release hardware allows easy installation and portability. The Ultimate-Air Pneumatic also has a pneumatic lateral support.
Jay Active Back (Models 520, 522, 525, 527 & 528)
The Jay Active Back, models 520/522/525/527 & 528, is a back support cushion designed to provide comfort and stability for chair users. This contoured support cushion is composed of lightweight materials and features adjustable height and back angles designed to help relieve back pain. It also includes an "Air Exchange" cover designed to reduce perspiration and heat buildup. With a rigid back shell, this support cushion is not intended to bow or stretch. DIMENSIONS: All models feature adjust
Jay Back Cushion
The Jay Back is a foam and gel back support cushion designed to protect against scoliosis, kyphosis, instability, back pain, and skin breakdown. The cushion consists of an impact resistant ABS plastic shell with a middle layer of molded, contoured foam, and a Flolite spinal insert to prevent pressure problems on the spine. Flolite is a gel-like liquid that will conform to the user's body, but resists returning to its original position to prevent pressure on bony prominences. The water-resistant
Jay Combi Posture Seating System
The Jay Combi Posture Seating System consists of two foam cushions, one contoured, dual density seat cushion and one lumbar support back cushion, designed to reduce sitting fatigue, lower back pain, and slumping while promoting correct posture. COMBI SEAT CUSHION: The Combi seat is molded from two different kinds of foam. Inside is a contoured foam core that is firm, for support. Outside, a second layer of soft foam is added for comfort. The foundation resists compression from leaning to help pr
Jenx Ziggy Cushion Toy
Ziggy is one-of-a-kind cushion that can be used for positioning, support, comfort and imaginative play.
Kensington Halfback Chair Pad
Kensington® Halfback® Chair Pad is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Chair pad has a molded plate and eggshell foam which encourages correct posture. Criss-cross elastic back straps are adjustable to fit all office chairs. It has a washable stretch Lycra slipcover.
Liquid SunMate Foam-in-Place Seating (FIPS)8
The Liquid SunMate Foam-in-Place Seating (FIPS) is assistive seating technology for users with complex positioning needs, such as fixed deformities or excessive tone problems. FIPS adjusts to a person’s unique shape in just five minutes, providing advanced posture control, and pressure relief almost instantly. Features of the insert include:
Lumbar Foam Cushion
The Lumbar Foam Cushion is a lumbar support designed for use by individuals in need of additional lower back support while sitting. Made of dense polyeyrethane foam, this cushion cradles the lower back offering additional support and stability. Features include a removable velour cover that fastens at the back of a chair with hook-and-loop fastener for desired positioning. The cover is machine washable. COLOR: The cover is beige.
Lumbar Pillow Half Moon (Model 887)
The Lumbar Pillow Half Moon, model 887 is a back support designed for use by individuals with back pain or injury. Constructed of firm foam covered with black colored brush nylon, this back support provides support to the lower back when sitting in a car seat, chair, etc. The pillow is latex free and comes with a contact closure strap to help hold the pillow in position (not shown). DIMENSIONS (LxW): 11.5 x 2.5 inches. COLOR: Black.
The Lumbar Roll is a foam roll cushion designed to correct improper lumbar curve and assist in establishing correct sitting posture. The polyurethane foam roll comes standard with a washable polycotton cover. OPTIONS: Securement strap. DIMENSIONS: 4 inches in diameter x 14 inches long. COLOR: The cover is blue.
The Lumbar Support is designed for use by individuals with lower back pain, weakness, or injury. Made of medical-grade polyurethane foam, this half-roll support comes with a velour cover and fills the curve in the lower back created by sitting. The attached adjustable strap secures the support to mst desk chairs and car seats. DIMENSIONS: 14 x 6 x 3 inches. COLOR: The cover comes in navy, tan, charcoal, or black
Elastic low back support. Attachment in front has two large grommets on each side of the closure tabs to insert fingers for good leverage in tightening the support. Velcro closure. /diamond shaped support in back with a removable silicone elastomer lumbosacral pad. 5 sizes fit waists 27.6 inches to 47.2 inches.
Massaging Pillow (Models 3128 & 3128A)
The Massaging Pillow, models 3128 and 3128A, is a vibrating pillow designed for use by individuals with upper extremity or severe physical disabilities.This pillow was designed to be used to help promote proper posture and provide back and neck support for activities such as activating a capability switch. It has low and high vibrating modes, and it can be used while in a wheelchair, office or automobile. POWER: Requires 2 D batteries. DIMENSIONS (DxLxW): 5 x 13 x 13 inches (model 3128) or 4 x 1
The MEDesign Backfriend is a back support cushion designed to prevent pain and discomfort associated with poor seating design at home, in the office, or travelling. Two models are available; both of which are portable, will fit into any chair, support both the lumbar and thoracic regions of the spine, give full adjustment of backrest inclination, and have a height adjustment to position the curve where the user needs it most. The Single Padded Model has a 1-inch polyether foam padding on both th
The Medic-Air Back-Pillo is an inflatable back cushion designed to provide back pain relief and long term sitting comfort for persons experiencing arthritis or back troubles. Engineered to support the curve of the lower back, this air-cushioned support adjusts to the user's needs with just a few puffs of air. It is designed with elastic straps that allows the user to fasten the pillow to the back of most chairs at the desired position. It also features three interconecting air chambers intended
Medic-Air Lumbar Roll
The Medic-Air Lumbar Roll is a back support, air-cushion designed to specifically fit the Lordotic curve of the lower back for persons experiencing lower back pain. Providing localized thrust and extension, this lumbar support is designed to fit any back and conform to any seat. It aims to provide back pain relief and long term sitting comfort. Adjustable by inflation, it also features a positioning strap and is deflatable for carrying in pocket or bag. DIMENSIONS (LxW): 20 x 7.5 inches. COLORS:
Medline Back Support (Models Mscbl16, Mscbl18, Mscbl20, Mscb16, Mscb18, & Mscb20)
The Medline Back Cushion is a wheelchair back support cushion designed for use by individuals with mobility disabilities. This support cushion fits in front of a standard wheelchair back, eliminating the hammock effect of a sling back. Straps hold the cushion in place. The cushion has two layers of high-density foam to support the entire back and a ShearX all-way stretch cover to reduce skin shear. The cover is antimicrobial and fluid-proof. It is available with or without lumbar support. SIZES:
Medline Reclining Back Cushion (Mscbr16, Mscbr18, & Mscbr20)
The Medline Reclining Back Cushion is a foam wheelchair back support cushion designed for use by individuals with mobility disabilities. A replacement for the standard wheelchair sling back, this cushion creates a fixed 10-degree angle of recline. The back support has two layers of high-density foam with a built-in rigid inset and a ShearX all-way stretch cover. The cover reduces skin shear and is antimicrobial and fluid-proof. The back support fits 16-inch wheelchairs (model MSCBR16), 18-inch w
Memory Foam Lumbar Support Back Rest (Model 7154Bl)
The Memory Foam Lumbar Support Backrest, model 7154BL, is a foam back support cushion designed for use to provide back support while sitting in a chair. This lumbar roll offers direct support for the lower back region. The cushion's polyurethane foam adapts to the natural contours of the user's back. It has adjustable straps to fit any chair. DIMENSIONS (HxDxW): 6.75 x 3.75 x 14.5 inches. WEIGHT: 2 pounds. COLOR: Black.
Memory Lumbar Cervical Cushion With Strap
The Memory Lumbar Cervical Cushion with Strap is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is made of memory foam designed to mold to individual body contours, offering support to the lumbar area and spinal column while sitting in a chair, car seat, or lying in bed. Features include a washable, removable polyester and cotton blend cover and positioning strap.
The Mould-A-Backbrace is a custom back brace designed for those individuals who have a back pain to fir the user's shape and provide back support. The Mould-A-Backbrace should always be fitted by qualified practitioners.
Movin' Sit Air Cushion
The Movin'Sit Air Cushion is an air flotation seat cushion designed to give the user a slanted seat base to promote proper sitting posture. This adjustable, wedge-shaped cushion is inflatable, washable, and portable. It also functions as a dynamic surface, with small, rounded protrusions on one side to create air circulation. The unit may also be used as a lower back support. It is inflated by mouth and easily adjusted for any chair or surface. DIMENSIONS: 14 x 14 inches.
The OBUS Forme is a back support cushion designed to provide proper spinal support in any chair, auto seat, sofa, or bed. This support conforms to the natural contours of the spine to guide the back into a correct anatomical position, allowing it to relax. This posture eliminates lateral pressure on the spine to reduce fatigue and discomfort and to provide support for the upper rib cavity. The support is available in high- or low-back models and can be fitted with an optional lumbar pad for extr
Obus Forme Customair Back Cushion
The Obus Forme Custom Air Back Cushion is an inflatable back cushion designed for use by individuals with mobility disabilities or back pain. Inflation and deflation valves are built into the cushion; air pump and release buttons enable the user to control the amount of support provided by the cushion. An attached elastic strap secures this cushion to any chair or seat. DIMENSIONS: 19.5 x 12.75 x 1.5 inches. COLOR: Black.
Obusforme Highback Backrest Support
The ObusForme Highback Backrest Support is a back support cushion designed for use by individuals with back pain or individuals who spend long hours sitting. Designed to support the head, neck, and lower back, this polycarbonate S-shaped frame conforms and supports the natural contours of the back both laterally and horizontally. The frame of the backrest is covered with three layers of polyurethane foam that can be removed and sponge washed. The support also has a removable and adjustable lumb
Original Mckenzie Airback Roll (Model 706)
The McKenzie Airback Roll, model 706, is an inflatable back support cushion designed for individuals with low back pain, injury, or arthritis. Constructed of nylon-covered vinyl, this portable lumbar roll can be adjusted for firmness by increasing or decreasing inflation. The roll can be deflated and folded for transport in a wallet, pocket, or purse.
Original Mckenzie D-Section Lumbar Roll (Model 700)
The Original McKenzie D-Section Lumbar Roll, model 700, is a back support cushion designed for use by individuals with lower back arthritis, injuries, or disabilities. This cushion features a D-shaped design intended to provide back support for the reduction of postural stress on the lumbar discs. Made of foam with a washable polyester cover, this roll secures to chairs and automobile seats with permanently attached adjustable elastic straps.
Original Mckenzie Lumbar Roll
The Original McKenzie Lumbar Roll is a back and lumbar support cushion designed to relieve back pain for individuals who have difficulty sitting for long periods. This portable lumbar roll supports the natural curve of the spine in all seating conditions. Designed with adjustable elastic straps, this roll made of foam and fits most chairs. DIMENSIONS (LxD): 11 x 5 inches. The straps are 38.5 inches long.
Original Mckenzie Lumbar Roll (Models 701 & 702) And Original Mckenzie Early Compliance Lumbar Roll (Model 704)
The McKenzie Lumbar Roll is a back support cushion designed for use by individuals with lower back pain, injury, or arthritis. Designed to support the lumbar lordosis while sitting this padded foam tube is placed between the curve of the lower back and the chair. A detachable elastic strap allows the roll to be worn around the waist or strapped to a chair. The roll's materials are washable. Model 701 is standard density and Model 702 is firm density. The Original McKenzie Early Compliance Lumba
Original Mckenzie Night Roll (Models 750, 751, & 752)
The Original McKenzie Night Roll is a back support cushion designed for use by individuals with lower back arthritis, pain, or injury. This roll provides back support for the lumbar region while the user is lying on his/her side or back. Made of foam with a removable, washable cotton and polyester cover, this roll ties around the waist. SIZES: Model 750 is extra small (fits waists up to 24 inches), model 751 is small/medium (fits waists 24 to 34 inches), and model 752 is large/extra large (fits
Original Mckenzie Super Roll (Model 708)
The McKenzie Super Roll, model 708, is a back support cushion designedfor use by individuals with lower back pain, arthritis, or injury. Made of foam with a velour cover, this roll features a removable elastic strap that can be attached to a high or low back chair and car seats. A Velcro strip sewn on the cover also enables direct attachment to fabric chair backs.
The Orthopod is a low back orthosis and full back cushion designed to provide the user with the precise spinal pressures at various points on the back. The cushion may be used by individuals suffering from low back pain, arthritis, post spinal surgery pain, post laminectomy/spinal fusion, various spinal disc conditions, and sciatica. The support is portable and may be used when driving or travelling by car, bus, truck, etc., or at work. Two models are available: a High Back and a Low Back.
Posture Curve Lumbar Cushions
The Posture Curve Lumbar Cushions are back support cushions designed to provides support vertically and laterally to the lumbar (lower back) area. The cushions are available with a strap to fasten to a seat at at the desired height. Models 102 or 103 for curved bucket seats of cars fit the inside width with angled back corners to go between the wings or bolsters at each end of the seat. The zippered covers are available in plaid or solid, velour or Merino wool.
Relax The Back Gel Seat Cushion
The patented, portable Gel Seat combines a gel cushion with a memory material base to disperse weight and relieve strain on your spine and soft tissue. The center groove elevates the tailbone, eliminating the point of contact that causes direct pressure on the spine. The unique wedge design promotes proper lumbar curvature while you're seated, so users can sit longer and stay free from fatigue and discomfort. Folds up for compact travel. DIMENSIONS: 13.5 inches depth X 16 inch width. COLOR: Blac
Relaxo-Bak Comfort Seat
Relaxo-Bak Comfort Seat is a back support cushion designed for use by individuals with back pain. This form fitting plastic auxiliary seat, can be used over any soft seat for added firmness. Allows body weight to be carried on the lowest part of the pelvis. Pressure is taken off the coccyx to prevent switching and tightening of the back muscles. Molded plastic, recessed at spinal end to protect coccyx. COLORS: Black, Gray, Tan, Burgundy, Off-White, or Sky Blue.
Remedease Full Height Backrest (Model 71301)
The Remedease Full Height Backrest, model 71301, is a foam back cushion designed for use to add back support to any chair. This over-sized backrest contains high-density medical-grade, anti-allergenic foam that keeps its shape to support the user for long periods of time. An elastic strap on the cushion adjusts to fit any chair and holds the backrest firmly and securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover. DIMNESIO
Remedease High Profile Backrest (Model 71491)
The Remedease High Profile Backrest, model 71491, is a foam back cushion designed to add lower back support to a work chair. This cushion supports the user's lower back with high-density, anti-allergenic foam that keeps its shape. The cushion's elastic strap adjusts to fit any chair and holds the cushion securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover, DIMENSIONS (HxDxW): 13 x 4 x 12.75 inches. WEIGHT: 1 pound. COLOR:
Remedease Lumbar Roll (Model 71101)
The Remedease Lumbar Roll, model 71101, is a lumbar support and foam back cushion designed to reduce back strain. This high-density foam cushion attaches to the back of a chair and provides direct support to the user's lumbar area. Its high-density anti-allergenic foam keeps its shape for long periods of time. An elastic strap adjusts to fit any chair and holds the backrest firmly in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cove
The Sacral Dish is a back support cushion designed for use in wheelchairs by those who in wheelchairs who are at risk for sacral coccygeal pressure ulcers. This cushion's semi-rigid base and unique shape provide a supportive foundation to fill in the chair's back upholstery while offering pressure-free ventilated protection of the sacrum. The support straps to the existing seat back and can be used alone or with the ISCH-DISH (see separate entry) or other seating products. This support comes com
Sacro Ease (Models Bwc, Bwcs, Wc & Wcs)
The Sacro-Ease, Model BWC, BWCS, WC and WCS, seat supports are designed to provide individuals in a wheelchair support under the hips and behind the lumbar spine. Models BWC and BWCS feature a backrest that clamps to wheelchair upright. Models WC and WCS are seats only. The seat supports for all models are made of two one-inch polyfoam cushions with steel frame and latex rubber support bands between the layers of foam. The foam is covered with a removable, washable and waterproof cover. The diff
Sacro Ease (Models Rcrx, Rscrx, Rncrx, Brc-Rx, Brsc-Rxm & Brnc-Rx)
The Sacro-Ease, models RCRX, RSCRX, RNCRX, BRC-RX, BRSC-RXM and BRNC-RX, are seat supports designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. The RCRX, RSCRX, RNCRX models are only seat cushions only that have a cutout at the center rear of the seat. These cushions have 1 inch of high density foam with a steel frame. The BRC-RX, BRSC-RXM and BRNC-RX feature a backrest with an adjustable lumbar support cushion mounted with th
Sacro Ease Keri Back Cushion (Models Kbt & Kbn)
The Sacro Ease Keri Back Cushion, models KBT and KBN, is a back support cushion designed to reduce back fatigue, ease lower back pain for individuals who have back injuries or posture problems. Designed for taller users, this back support cushion has a steel frame, rubber and 1 inch of memory foam in the back. It is bendable for additional support and has a four way strapping system to fit most office chairs and car seats. DIMENSIONS (HxW): 18 x (15 or 12) inches. WEIGHT: 5 pounds. COLORS: Bla
Sacro Ease Sports Portable
The Sacro-Ease Sports Portable is a seat and back support designed for use at spectator sports events. The seat support may be used with or without the existing backrest. The seat closes to be carried like a briefcase. The seat support is manufactured with .5 inch of polyfoam on top of a bendable carbon steel frame with rubber supports. The upholstery is water-resistant fabric. The back support has a built-in lumbar support pad. The Sports Portable has a non-skid bottom, and it is available with
Sacro Ease Standard (Models Br, Brsm & Brn)
The Sacro Ease Standard, models BR, BRSM and BRN, is a back support cushion are designed for office chairs and auto and truck bucket seats with existing firm bottoms. This product features a seat bottom and backrest with adjustable lumbar pad on a foldable steel frame with rubber strap supports and a non-skid bottom. The Sacro Ease Standard provides support under the hips and behind the lumbar spine. The units are designed to fit to the individual and not the seat, thus the unit can be moved fro
Schukra Adjustable Backrests
The SCHUKRA Adjustable Backrest is a back support cushion designed to help ease back pain. Providing threefold support in the pelvis, lumbar and upper body regions, this support aid adjusts to fit the user's spinal column while sitting. Adjustments are made with a small dial found at the bottom-side of the cushion. With its compact design, it can be used in the car, home or office. COLOR: Variety. WARRANTY: Lifetime - for the original purchaser.
Sciatica Saddle Pillow
The Sciatica Saddle Pillow is designed for those who deal with sciatic nerve issues, chronic back pain or experience balance problems. This pillow helps relieve pain by off-loading pressure from thighs and shifting weight back to the pelvis, where the body is equipped to take the pressure.
Seat2GO is a floor seat designed for children who need extra support while seated. Contoured seat prevents user from sliding forward. Improves seating posture. Features 95 degree seat to back angle and double strap trunk support and belt.
Sidehugger Back Cushion
The SideHugger Back Cushion is a back support cushion designed for use by individuals with mobility disabilities. The cushion attaches directly to the existing wheelchair back and hugs the user when leaned against, encouraging the user to position him/herself using the built-in lateral supports. DIMENSIONS (WxH): Standard and tall models are available for 16-, 18-, and 20-inch chairs.
Sit'n Easy Inflatable Back Cushion (Model Ez-1)
The Sit'N Easy Inflatable Back Cushion, EZ-1, is a back support cushion designed to provide proper back support to the lumbar (lower back) area. The cushion is covered in a flocked material and deflates for transport or storage. DIMENSIONS: 15 x 15 inches.
Softspot Low Profile Back Rest (Model 7151Bl)
The SoftSpot Low Profile Backrest, model 7151BL, is a back support cushion designed for use to reduce back strain while sitting for long periods. This polyurethane foam backrest cushions and supports the lower back and spine, reducing strain and fatigue. Its upper edges are curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape and provides support. The surface is non-ab
Softspot Lumbar Roll Backrest (Model 7150Bl)
The SoftSpot Lumbar Roll Backrest, model 7150BL, is a back support cushion designed for use to improve comfort and posture for individuals who sit in a chair for long periods. This polyurethane foam cushion provides direct support for the lumbar region. The upper edges are softly curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape to maximize support. The surface is n
The Spine Align is a lumbar support cushion designed to be used as a lower back support for people with chronic sitting pain or who must sit for long periods at a time and who require additional support at the lumbo sacral curve. The cushion features a convex back, a soft center channel and a moisture resistant Cordura nylon cover. The portable cushion attaches with Velcro straps to a wheelchair, car seat, or office chair. DIMENSIONS (HxWxD): 5 x 13 x 2.25 inches thick at the center. WEIGHT: 5 o
Spine Ease Deluxe Massage Pillow (Model Sp-1)
The Spine Ease Deluxe Massage Pillow, SP-1, is a vibrating lumbar support cushion designed to reduce lower back discomfort. This portable pillow can be used anywhere - in the home, office, or car. POWER: Battery operated on 2 "D" batteries (not included). DIMENSIONS: 14.5 x 15 inches.
Spine Reliever Back Support Bed Wedge
The Spine Reliever Back Support Bed Wedge is a backrest designed for use by individuals with back pain, weakness, or injury. This wedge is topped by memory foam that contours to the user's body and enables the user to sit upright in bed or use it in two reclining positions. An adjustable neck roll is included.
Standard And Trisectional Lumbar Cushions
The Standard and Trisectional Lumbar Cushions are back support cushions designed to provide support for those who must remain seated for long periods. The Trisectional Cushion is designed with an elevated center to provide support in three planes: vertical, lateral, and direct lumbar area. The standard cushion has a full contour without an elevated center. A washable cover is standard on both models. Both models are available with or without a Masonite insert for rigid support and a securement s
Stimulite Lumbar Support
The Stimulite Lumbar Support is a back support cushion designed for use by individuals who need posture support. The cushion provides firm support in a chair or car while improving posture, relieving pressure, and keeping the user cool and dry. It has a removable, adjustable strap and is machine washable.
Techkewl Cooling Wheelchair Cushion
The TechKewl Cooling Wheelchair Cushion is a cooling cushion designed for use by wheelchair users with multiple sclerosis or other neurological disabilities. Made of 100-percent cotton, this cushion features Velcro hook and loop attachments, two phase change cooling inserts that maintain a comfortable 58 degree Fahrenheit temperature for up to three hours, and one back seat cushion. SIZE: One size. COLOR: Royal blue.
The Tenderlift Cushion? is a riser cushions are intended for people who need assistant while standing from a seated position. The riser is desing by tilting at an angle to assist with standing up from a chair, others lift horizontally via an inflatable cushion.? The cusions are suitable for use up to 600 pounds (254 kilograms).
TFH Resonance Cushion (Model 9Rscn)
The Resonance Cushion, model 9RSCN, is a vibrotactile amplification system designed for use with children and adults with neurological, emotional, or cognitive disabilities. This cushion can be used in a standars chair or a wheelchair and features a built-in amplifier with cables to connect to the television or a stereo system rated from ten to one hundred watts of power. DIMENSIONS (HxWxD). 18 x 13 x 4 inches.
The Hugster is a pillow designed for a variety of uses such as nursing, pregnancy, infant support, TV/reading, sleeping and back support. It is horsesoe shaped with a velcro fastener that hugs the user. This pillow is made of 100% polyester filling with a cover that is 100% cotton.
Tms Slat Back (Models 2210, 2010, 2208, & 2208)
Alternative to solid back insert or soft back cushion. Slatted, padded back inserts provide stabilty without the rigidity of a solid back insert. Can also be used as a back extension providing 2 to 4 inches over the standard upholstery. A non-skid extension lays flat on the wheelchair seat, or under a seat cushion to prevent the back cushion from shifting. Standard adult (2210) 22 inches high, 10 slats wide. Standard adult (2210) 20 inches high, 10 slats wide. Narrow adult ( 2208) 22 inches hgih
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted seat cushion for a senior with advanced osteoporosis. Using previous cushions as a model, a new set of cushions that are 420 by 475 millimeters and joined by a 75 millimeter spine, with a 50 millimeter-thick Dunlop Enduro foam filling were created. The long-wearing fabric covers are zippered so they can be taken off for washing. Two pieces of 39 millimeter wide webbing form the handles. The travel cushions have made it poss
Travelin' Toddler's Car Cushion
The Travelin' Toddler's Car Cushion is a head support, polybag cushion designed to offer support and comfort while sleeping for children when traveling. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.
Tush-Cush & Car-Cush
The Tush-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, the cushion has a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable cover. The Car-Cush is a smaller version of the Tush-Cush and offers the same features. The Tush-Cush is available with a choice of a velour cover, a coated vinyl generaltional fabric cover, or a faux leather c
U Form Deep Contour Back
The U Form Deep Contour Back is a foam back support cushion for use on wheelchairs. The segmented foam structure is available in multiple configurations allowing the back cushion to be built to meet the user's requirements. Sections can be removed, exchanged with other foam densities or removed to accommodate specific positioning needs. The segmented foam structure is formed with an additional 0.75-inch topper for added comfort and transition between the outer cover and the firmer inner foam seg
Varilite Backrest & Varilite Split Backrest
The Varilite BackRest and Split BackRest are inflatable back support cushions designed for use by individuals with mobility disabilities, spinal cord injury, and others who need back support. The cushions offer lower lumbar support and promote spinal extension during wheelchair use, extended car rides, air travel, and in office chairs. Support encourages upright sitting posture and decrease muscle fatigue. Cushions have a mesh cover with reticulated foam that wicks moisture away from the skin. A
Wheelchair Back Support
The Wheelchair Back Support is a lumbar back support cushion designed to provide firm back support for wheelchair users. Covered in stain-resistant velour, the half-moon-shaped support is formed of quick-recovery foam and attaches to the wheelchair using loop handles. DIMENSIONS (LxWxD): 16 x 8 x 3 inches.
Wing Back Support
The Wing Back Support is a back support cushion designed for use by individuals with back pain, weakness, or injury. This support can be used in standard chairs, office chairs, or on car seats and provides lateral support for correct posture as well as lower back support. This cushion is available in polyurethane foam, six-pound VitalFoam Memory foam, or Memory Lite foam, and all models include an adjustable strap to secure the cushion to a car seat. DIMENSIONS: The polyurethane foam model is 1
Workmod Back Support (Model Nc73585)
The WorkMod Back Support, model NC73585, provides firm lower back support and encourages correct sitting position and posture, eliminating discomfort and fatigue. The cushion can be used on any type of chair and is designed to stay in place during use.
Yogaback Posture Cushion For Driving
The YogaBack Posture Cushion for Driving is a back support cushion designed for use by drivers with lower back pain. This polyethylene foam cushion features sacral and thoracic pads that attach with Velcro to the inside back surface of the cushion's fabric cover. The pads are infinitely height adjustable. The cushion has a slim profile so the user will not be pressed forward in the car seat. The cushion's depth is adjustable with a choice of two different pad thicknesses. The cushion comes with
Yogibo Yogi Support
The Yogi Support is a specialty bean-bag pillow filled with uniformly sized polystyrene beads that work hand-in-hand with the lycra-cotton blend cover. This combination of bead and fabric allows the Yogi Support to conform to the contours of a child's body. Unlike traditional bean bags where the beads move around with the slightest movement, the Yogi Support stays in the same shape it's placed in.