Accu-Back Adjustable Lumbar Roll
The Accu-Back Adjustable Lumbar Roll is designed for use by individuals with lower back pain, injury, or arthritis. This device is a half lumbar roll measuring 5 x 11 x 2 - ½ inches. Additionally, it relieves neck and back pains as well as sitting discomfort. It is hypo-allergenic stain resistant.
Accu-Back Back Supports
The Accu-Back Back Supports are a portable back support cushions made of fire-retardant fabric and temper foam. Twelve models are available: an executive model has two vertical lumbar pads and shoulder rest, deluxe executive includes a seat pad in single unit, economy pillow back has back rest with single horizontal lumbar support, deluxe includes shoulder rest. Also 3 models with no additional parts needed. COLOR: Variety.
Acculift Back Support System
The AccuLift Back Support System is designed to provide lumbar support and to reduce the chance of lower back injury for persons working around the home, or on the job where any type of lifting is performed. As an injury prevention product, its technology was developed by orthopedic surgeons. The support system fits around the waist with cris-crossing straps in the back.
Adapted Office Chair-Split Seat Chair
Opera 60 Split-Seat chair is a customized office chair designed to accommodate the body shape to support a healthy posture while maximizing comfort for to reduce back pack and repetitive strain injuries. The backrest of the Opera Back is tailored to specific statures, giving correct pelvic and lumbar support. The arms are height adjustable with multi-positional arm pads. The arm pads can be easily removed or reversed where extra short arm pads are required. The seat is designed to hold the pe
ADI Aluminum Series Back Support - Extra Tall
The ADI Aluminum Series Back Support - Extra Tall is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. ADI rides back support results in less pain due to more equally distributing forces through the pelvic base of support. ADI backrest is designed to give very low trunk support through different contours. Aluminum series back support is ergonomically designed product to provide relief from the low back strain on the wheelchair. ADI back support p
ADI Aluminum Series Back Support - Medium
The ADI Aluminum Series Back Support – Medium is designed for use by individuals with lower extremity. The ADI back support provides with mounting options to give adjustable or fixed positioning. ADI backrest is designed to give very low trunk support through different contours. Aluminum series wheelchair back provides with optional lateral supports to help client in balancing its position. Back support – medium is ergonomically designed product to provide relief from the low back strain on the
ADI Aluminum Series Back Support - Standard
The ADI Aluminum Series Back Support – Standard is designed for use by individuals with lower extremity. ADI aluminum series back support - standard is an option to get rid of inefficient, non-supportive alternatives. Aluminum series wheelchair back provides with optional lateral supports to help client in balancing its position and provides aids in preventative postural decay. Standard backrest is designed for lightweight wheelchair which provides strong components available for the active user
ADI Aluminum Series Back Support – Low
The ADI Aluminum Series Back Support – Low is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI aluminum back support is designed to distribute the weight and force of the pelvic equally. ADI backrest is designed to give very low trunk support through different contours. Aluminum backrest is easily attached to the necessary height on the back posts of the wheelchair. Aluminum series wheelchair back provides with optional lateral supports
ADI Carbon Fiber Series Back Support - Low
The ADI Carbon Fiber Series Back Support – Low is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI carbon fiber series back support - low is an ultra-lightweight seatback which designed especially for proper posture, eases the strain on the low back. CF series back support – low results in less pain due to equally distributing forces through the pelvic base of support. Back support – low ADI carbon series backrest is for that individual
ADI Carbon Fiber Series Back Support - Medium
The ADI Carbon Fiber Series Back Support – Medium is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI carbon fiber series back support - medium results in less pain due to equally distributing forces through the pelvic base of support. ADI back support - medium is for that individual which knows the importance of seating and demands for lightest and strongest components available. Carbon fiber series back support is an ultra-lightweight
ADI Carbon Fiber Series Back Support – Standard
The ADI Carbon Fiber Series Back Support – Standard is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI carbon fiber series back support - standard provides with optional mounting hardware to fit the specific needs of the clients. ADI back support is an ultra-lightweight seatback which designed especially for proper posture, eases the strain on the low back. Carbon fiber series back support results in less pain due to equally distributin
The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting
Adjustable J Hook Bracket Hardware Seating Package (Package 20Xx)
The Adjustable J Hook Bracket Hardware Seating Package, package 20XX, is seating hardware designed for use on a wheelchair. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1- inch diameter tube two-hole J hooks; a pair of five-hole adjustable L brackets; a pair of 1-inch diameter tube six-hole J hooks; a pair of two-hole adjustable L brackets; a 1-inch diameter tube drop stop; and a 1-inch diam
Adjustable Side Support Lumbar Cushion
The adjustable side support lumbar cushion designed to improve posture and reduce stress on the lower back. This cushion is firm and supportive, this cushion and positions users body in an ergonomic position. Has supportive side arms to keep users body stable and upright. Helps prevent users from slouching. Features an adjustable band and arms so the user can customize the comfort level. Can be used in an office chair, reading chair or car seat
AliMed SI Belt
The AliMed SI Belt is a muscle stabilizer belt designed for users with lower extremity disabilities, back pain, or muscle and ligament tensions. The belt stabilizes muscles and ligaments of sacroilliac joint. Hook-sensitive, 2 inch with non-elastic belt with nonslip interior conforms to body contours. Elasticized closure allows non-binding comfort during activity.
Alleviate Support System (Model 99444)
The Alleviate Support System, model 99444, is an arm and back support designed for use by dentists and dental assistants to prevent upper extremity injuries. The purpose is to relieve and reduce the occurrence of musculoskeletal pain and localized fatigue caused by excess weight placed on the shoulders when one or both arms are elevated away from the body during dental procedures. The unit includes a pair of gel elbow rests to provide comfort and support while absorbing vibration from instrument
Aluminum Series Back Support
The Aluminum Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. This contoured support is available for chairs from 10 through 20 inches in width. It is available with stationary or removeable mounting and adjustable positioning. It clamps to 0.6 through 1 inch tubing, round or oval, with no spacers required. The unit is compatible with 2-Point Pro and Quick Release mounting systems. SIZES: Low, medium, standard, tal
Anna-Dote is a back support cushion and solid back insert designed to aid individuals who use wheelchairs, or straight-back/recliner geriatric chairs to sit upright, allowing for the reduction in stress, discomfort and fatigue that can accompany a slouched to the side position. This positioning supportive aid fits over the backrest of either a wheelchair or a geriatric chair and provides patients with an extended backrest to keep them upright and prevent falling or sliding to the side of the cha
At Ease Contour Lumbar Support (Models L250 & L500)
The At Ease Contour Lumbar Support, models L250 and L500, is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. An orthopedic design relieves tension and supports the spine. It is made of molded high resilient urethane foam and the removeable cover is made of washable polyester. The strap in the b
At Ease Half Roll Lumbar Support & Full Roll Lumbar Support (Model L50 & L100)
The At Ease Half Roll Lumbar Support and Full Roll Lumbar Support, models L50 and L100 is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. The polyurethane foam is comfortable and has excellent recovery. The durable polyester cover is removable and washable. The elastic strap is designed to fit
Back Jack (Models Bj-M & Bj-Xl)
The Back Jack is a back support cushion designed to provide support when sitting on the floor. All models feature a slightly reclined back and a wedge seat. They have a steel frame with a foam seat pad and a canvas cover. SIZES: Medium (BJ-M) or extra-large (BJ-XL). DIMENSIONS (HxDxW): 20 x 11 x 14 (medium) or 21.5 x 12.5 x 16 x 12.5 (extra large).
Back Rest, Sport Seat, & Seat Rest Self-Inflating Cushions
Open cell foam back rest with airtight, waterproof nylon shell. Self inflates; valve to adjust user's comfort. Size 16 by 8 by 2.5 inches; blue, cedar brown covers available. Also available: Seat Rest, similar product for seat of chair, size 12 by 16 by 1.5 inches; price $65.00; Sport Seat, like Seat Rest except heavier duty covering, in navy, rust, or green.
The Back-A-Line Belt is a curved lumbar belt designed for individuals with lower extremity disabilities or back pain. The belt is designed to be a curved lumbar pad and is intended to improve the user’s posture at a subconscious level, which is the only way to reduce back pain or prevent future injury. Its non-stretch design eliminates the risk of muscle weakening, a concern with other back belts. Designed to combat the actual cause of back injury — poor posture rather than addressing only the s
The Back-Huggar is a back support pillow designed for use by individuals with back pain or injury. It is constructed of polyurethane foam with a cloth, hand-sewn cover with a zipper. The Back-Huggar is available in four styles: Standard fits most straight back chairs and auto bench seats; Bucket Seat for designed for auto bucket seats and cureved back chairs; Secretary for open back chairs; and Extra Wide for wider backs. Elastic straps for attaching support to seats and chairs are available; t
Back2Go Back Support
Back2Go Back Support is designed for children to strengthen posture and trunk on a chair, wheelchair, or stroller. It features a two-strap system with buckle closure to secure back support to an existing back surface. Straps can be stored in back pocket when not in use. The height and width can be adjusted. It has removable lateral supports for additional support. There is a zippered vinyl trunk harness in an “H” configuration for anterior chest support.
The Bakrol is a lumbar support designed for use by individuals needing to keep the lumbar spine in extension. Made of high-resiliency foam, rhe roll is available in a choice of regular or high density and is equipped with a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: The regular density comes in 11 x 5 inches or 12 x 4 inches and the high-density is available in 12 x 4 inches.
Bath Safe Adjustable Shower Seat with Arm and Back
Bath Safe Adjustable Shower Seat with Arm and Back is a shower seat with back designed for people with balance and lower extremity disabilities to use while bathing. Back and arms are removable. Built-in hand held shower spray holder in seat. This seat and back are durable and rust-proof.
The BedLounge is a back support cushion designed for use by individuals with physical disabilities. Resembling a chair without a seat, this large cushion enables the user to sit upright in bed and provides support for the upper and lower back, arms, shoulders, neck, and head while the user reads or watches television. This padded support has a lightweight internal polypropylene frame and features pivoting armrests and a height- and angle-adjustable headrest pillow. Storage pockets on the armrest
Bucketseat Lumbar Cushion
The Bucketseat Lumbar Cushion is a back support cushion designed to fit snugly against bucket seats to provide lumbar support and promote proper seating posture. Made of molded foam, the cushion has contoured edges and is available with or without a securement strap. DIMENSIONS: 15 x 13.5 inches. COLOR: Blue, burgundy, beige, or grey.
Carbon Series Back Support
The Carbon Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. The unit consists of a carbon shell, cushion and cover. It has an active support contour of 2.5 inches. The unit is compatible with Fixed Elite, 2-Point Pro and Quick Release mounting systems. The fixed positioning unit clamps to 1-inch tubing; all other tubing sizes require spacers. The adjustable positioning unit clamps to 0.6- through 1-inch tubing, rou
Comfort Company Acta-Back
The Comfort Company Acta-Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-back features three layer foam construction, including visco surface layer. The lightweight durable aluminum shell comes with head support holes and lateral hardware slots. Comfort company back has patented compass hardware that quickly installs to wheelchair and adjusts for depth, height, and angle while the user remains seated. Acta-back
Comfort Company Acta-Back Deep
The Comfort Company Acta-Back Deep is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-back deep has three layer foam construction including visco surface. It has lightweight durable aluminum shell that comes with head support holes and has patented moldable aluminum stays that conform and support back. The back provides pelvic and scapular relief. Its patented compass hardware quickly installs to wheelchair and easily a
Comfort Company Acta-Back LTS Back
The Comfort Company Acta-Back LTS Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-back LTS back is a lightweight durable aluminum shell that comes with head support pad holes and lateral trunk support hardware slots. Acta-back LTS has three layer foam construction, including Viscool surface layer and has patented moldable aluminum stays that conform and provides back support, pelvic and scapular relief. Acta-bac
Comfort Company Acta-Contour Back
The Comfort Company Acta-Contour Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort Company Acta-Contour Back is designed to provide lower thoracic relief and support. Comfort Company Acta-Contour back’s patented lightweight moldable aluminum shell stays conform and support the back and comes with head support holes. Comfort Company Acta-Contour Backrest has three layer foam construction, including comfortable Visco surface lay
Comfort Company Acta-Embrace Back
The Comfort Company Acta-Embrace Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-embrace back has aluminum stays on the backside of the two layer foam pad and can be molded to support lumbar, scoliosis, and kyphosis needs. Acta-embrace back has integrated trunk supports that are attached to a planar aluminum backrest shell and can be adjusted for angle, height, and up to a total of 3 inches of width to create a
Comfort Company Acta-Embrace LTS Back
The Comfort Company Acta-Embrace LTS Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-embrace LTS back has integrated trunk supports that are attached to a planar aluminum backrest shell and can be adjusted for angle, height, and up to a total of 3 inches of width to create a custom supportive shape. Acta-embrace back provides extreme stability, pelvic and scapular relief and years of durable use. Acta-embrace LT
Comfort Company Acta-Relief Back
The Comfort Company Acta-Relief Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-relief back has a thick visco surface layer that adds extra comfort and support by contouring to the user's body. Acta-relief back features flexible, adjustable straps that allow the product to offset the center of pressure and better remove pressure points from the spine and allows for a more aggressive molding to each individual pa
Comfort Company Acta-Relief LTS Back
The Comfort Company Acta-Relief LTS Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-relief LTS back is designed to provide more aggressive molding to each individual's natural anatomy and support many seating positions ranging from upright seating to a severely rotated back. Acta-relief LTS back features flexible, adjustable straps that allow this product to offset the center of pressure and better remove pressu
Comfort Company Comfort Back
The Comfort Company Comfort Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company comfort back has a dual density, high resiliency foam that comfortably contours to user's anatomy. Comfort back is available with or without built-in lumbar support and coincides with existing wheelchair back. The back is easy to install. Comfort back support fits 16, 18, 20, 22 inches wheelchair size and has weight capacity of 450 pounds.
Comfort Company Contour Visco Back
The Comfort Company Contour Visco Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company contour visco back features visco surface layer that adds extra comfort and support by contouring to the user's body. Visco back has a dual density, high resiliency foam that comfortably contours to user's anatomy. Contour visco back is easy to install and coincides with existing wheelchair back. The back support fits 16, 18, 20, 22 inc
Comfort Company Elements Foam Wheelchair Back
The Comfort Company Elements Foam Wheelchair Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company element back is a general use wheelchair back that has 1inch of pressure relieving foam for a greater level of comfort and support than the standard wheelchair sling back. Element back features an innovative strapping system that can accommodate for kyphosis and provide lumbar support and the back tension is adjustable to fit
Comfort Company Incrediback Moldable
The Comfort Company Incrediback Moldable is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company incrediback moldable back has patented moldable aluminum stays that conform to and support the user's back. The standard moldable back is best for the wheelchair user who needs the support and comfort that a normal sling back cannot provide. The incrediback is fully adjustable for angle and height, with 2 inches of depth adjustment. I
Comfy-Back Bacpac (Model 400)
Lumbar cushion which includes reusable hot or cold pack. Gel pack is microwave heated, or frozen and then inserted under fabric flap with Velcro closures. .
Comfy-Back I (Model 100)
Back support provides extra-firm lumbar support. Fabricated of high density foam. Half-rounded cushion attaches to any seat back with adjustable 3/4 inch non-roll elastic. 15 inches long by 3 inches wide by 5 inches high. Nylon covers have zip closure. Washable. Colors available.
Comfy-Back Ii (Model 200)
Back support with angled coccyx support. Adjustable. Vinyl hinge tilts spine upward and pulls half round lumbar cushion into lower back. Lumbar cushion is Velcro-backed. Attaches to any seat with adjustable 3/ 4 inch elastic. 15 inches long x 5 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.
Comfy-Back Iii (Model 300)
Seat and back support with half-rounded cushion attached to back and wedge-shaped square seat. 15 inches long by 15 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.
Comfy-Back Jr (Model 500)
Back support. Two half round cushions are hinged open for customized lower back support. One half is firm, other soft. Can close to form round cervical roll for back or neck. Fabricated of polyurethane foam. Nylon covers have zip closure. Washable. Attaches to any seat with adjustable 3/4 inch elastic. Dimensions: 12 inches long by 3 inches wide by 11 inches high. Has 6 inch diameter when closed. Colors available.
The Compu-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, this cushion is specially designed for use while using a computer. Features include a wedge-shaped design to tilt the pelvis forward, a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable velour cover. DIMENSIONS: 13 x 16 inches. COLOR: The cover is black. WARRANTY: One-year lim
Contour Back Cushion
The Contour Back Cushion is a back support cushion designed for use by individuals with arthritis. Its orthopedic contour shape allows for a correct sitting position, minimizing lower back discomfort. The molded foam rubber cushion comes with a removable cover. DIMENSIONS (HxDxW): 14.25 x 4.5 x 13 inches.
Contour Freedom Back Support Cushion
The Contour Freedom Back Support Cushion is back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is designed to fit the curve of the back and features a full-length back support with 10 zones for alignment and support in any chair. The tapered top supports upper back and shoulder blades to allow upper body movement and the contoured bottom eliminates pressure from tailbone and hips. A
The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Made of molded foam, this support is intended for use with firmer seating such as office chairs or car seats. The roll includes a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: 18 x 6 x 2.5 inches.
Contoured Back (Model Cb2000)
The Contoured Back, model CB2000, is a curved back insert for wheelchairs designed to position individuals with severe physical disabilities when seated in a wheelchair. The Back Support Panel is made of high-strength aluminum alloy laminated with a black textured vinyl and edged with a continuous neoprene edging which is formed for a contoured fit. All mounting holes are a stardard one-inch between centers. Mounting hardware allows for a variety of back angle adjustments with positive locking.
Cool Mesh Back Support System
The Cool Mesh Back Support System is a lumbar support designed for use by individuals with lower extremity disabilities, back pain, or those who have difficulty sitting for long periods. Designed to help promote good posture and lumbar support, this ergonomic back support can be used at home, work, or in a car. The system is made of mesh fabric that allows cool air flow comfort and attaches to the seat with an elastic strap. The strap can be adjusted upward and downward.
Cpsc Standard Back (Models Sb-01 Thru Sb-06)
Seating insert. The standard back has integral waist bolsters that contribute to central positioning of the lower spine. Chest bolsters may be added easily without modifying the upholstery.
Curved Backs (Mod I)
Solid back insert modification for Freedom Design solid backs. Pressed wood with foam and upholstery. Adapts to any style hardware.
The D-Shaped Support is designed for use by individuals with lumbar injuries or disabilities. Intended for use where forward leaning or movement occurs, this roll is firmer than the regular Bakrol (see entry). The roll includes a washable cotton cover with a strap and a quick-release buckle. DIMENSIONS: 12 x 4 inches.
Doodlebug Insert (Model 1065)
The Doodlebug Insert, model 1065, is a back support cushion designed for use with Kay Kinder Chairs (see separate entry, as well as other positioning chairs and high chairs. This terry cloth covered foam support also reduces the width and depth of the chair, enabling it to be used by smaller children. The cover can be unzipped and remove for washing. COLOR: Red or light blue.
E Z Back System (Models Ezl2001, Ezl2002, & Ezl2003)
The E Z Back System, models EZL2001, EZL2002, and EZL2003, is a back support that can be mounted on sling back wheelchairs, commodes, driver or automobile passenger seats, or chairs. The system includes two laterals, a Velcro back, and a front panel with lumbar support. The system's lateral supports are independent of one another, so they are interchangeable from side to side. The system's lumbar support is also adjustable, so the system can give the user needed lateral or pelvic support. OPTION
Contoured back with internal metal frame. Mounts in wheelchair frame with back hooks with nylon straps and buckles. Back height and back angle adjustable. Mid-back can flex or be fixed in one position. Vinyl or fabric. .
Evolution Back is a wheelchair back support system designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. The system is adjustable to accommodate growth and its "slide and snap" hardware is operable with one hand. It has an oversized self-inflating cushion for immersion of bony prominences, and is designed to work with lateral supports, hip belts, and hip guides. The system includes hardware with one inch of lateral a
Evolution Back Deep
Evolution Back Deep is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. It provides full posterior support and up to seven inches of lateral support. The seat can be adjusted in depth plus or minus three inches (up to 17.5 degrees of recline), and can be adjusted laterally plus or minus one inch at four points to accommodate growth or disproportionate body types. The system includes a PSIS
Ez 2 Rest
The EZ 2 Rest pillow is a lumbar support pillow designed for use in office or car. Helps support spine and maintain good posture while seated. Includes a 4"x8" gel pack. Warm it in the microwave or chill it in the freezer then slip it in the pillow's pocket. Hot or cold therapy can help ease tension, reduce inflammation and relax muscles. Adjustable elastic strap fits around most any chair.
The Fastback is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. This air and foam flotation cushion is comprised of three densities of foam, positioned according to density to provide mild lateral support, scapular contour, and vertebral comfort and pressure relief. A valve allows the user to release more air for greater envelopment and stability. Other features include a PSIS block for l
Full Body Support Cushion
The full body support cushion is a lumbar support cushion. Allows user to sit in a natural, relaxed position. The back flexes from flat to upright to conform to furniture angles.Reduces strain on the lower back, pelvis and spine. Discourages slouching. Strap adjusts for use in a chair or car seat. Lightweight and easy to transport.
The Gerimate Bolster is a back support cushion designed to offer support and comfort for persons using Geri-chairs. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.
Healthy Back Deluxe Lumbar Support
The Healthy Back Deluxe Lumbar Support is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Designed to provide support to the lumbar area and spinal column, this cushion is made of a 100-percent molded open-cell memory foam that molds to individual body curves and contours. Other features include a hugging wing-like design that provides added comfort and stability. The cushion can be used fo
Healthy Back Inflatable Lumbar Support
The Healthy Back Inflatable Lumbar Support is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. To find optimal position, release the valve and the backrest will inflate automatically. The support can be stopped at any time to meet user's firmness preference. When done, twist the valve and let the backrest quickly deflate to make portable.
Homedics Adjustable Lumbar Cushion (Model Lc-1)
The Homedics Adjustable Lumbar Cushion, LC-1, is a back support cushion designed to fit virtually any size back and to help alleviate back ache and strain. The cushion will adapt to any seating configuration and can be used at home, in the office or car. DIMENSIONS: 18 x 9 inches.
I Back (Model H)
Modification for any Freedom Designs solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Cut in the shape of a capital letter-I+ so that trunk supports are at the trunk and adjustable the length of the center section. Can be used with any hardware.
I-Spire Series Lumbar Cushion
The I-Spire Lumbar Cushion is a lumbar support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. Supports lower back while seated which helps to reduce back tension. Comes with an adjustable strap with buckle to hold lumbar cushion in place.
Imak Back Cushion
IMAK® Back Cushion is a lumbar support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods of time. Designed to help improve posture and reduce back stress. Large and small vacuum-formed air pockets generate a pressure point massage for the back.
Universally designed to fit most car seats as well as office chairs. Constructed of sculpted foam. Removable polyester cover is washable.
Incredihugger Wheelchair Back
The IncrediHugger Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, scoliosis, or upper extremity disabilities. This replacement back can be custom molded to fit the user's body contours. Its lateral supports help discourage side leaning, and its seat recline of up to 30 degrees discourages front sliding. The back has four inches of height adjustment, and may be folded with the wheelchair. The back comes in a standar
Invacare Curved Back & Invacare Pneumatic Curved Back
The Invacare Curved Back is a back support cushion for use with wheelchairs. Designed for users who require a solid back support, it features both comfort and visco-elastic foam and a built-in sacral positioning pad. The Invacare Pneumatic Curved Back includes a pneumatic lumbar support bladder. OPTIONS: Lateral supports, neck supports, and shoulder supports.
Invacare Infinity Dualflex Back
The Invacare Infinity DualFlex Backis a back support cushion designed for use in wheelchairs. A biangular flex hinge between the thoracic and sacral support panels provides precise adjustment of the back support shape. This allows for natural thoracic extension and balancing for users who require a higher level of back support. The dynamic flex feature also provides ease of upper body mobility as well as support and pelvic stability. OPTIONS: A range of accessories is available.
Invacare Infinity Loback
The Invacare Infinity LoBack is a back support cushion designed for use in wheelchairs. This adjustable back cushion features integral lateral supports and provides support to the lower pelvis while supporting the upper body range of motion. OPTIONS: A range of accessories is available.
Invacare Infinity Uniback & Invacare Infinity Uniback Foam-In-Place
The Invacare Infinity UniBack and the Invacare Infinity Uniback Foam-In-Place are back support cushions designed for use in wheelchairs. These cushions are single-panel back supports that offer economical versatility. Pelvic stabilizers and thoracic laterals are independently angle- and width-adjustable to accommodate a range of body shapes, as well as growth or change. OPTIONS: A range of accessories is available.
Invacare Personal Back & Personal Back Plus
The Invacare Personal Back is a back support cushion designed for use with wheelchairs. This lightweight back support provides comfort and positioning with built-in lumbar and lateral supports. The Personal Back Plus offers the same features plus increased lateral depth for additional stability and support. The back can be mounted in front of or behind the rear canes or at a reclined angle.
The Invacare S-Back is a back support cushion designed for use with wheelchairs. This system adjusts to the shape of the user's spine with the turn of a knob and the curve can be adjusted throughout the day for different activities. Special mounting clips enable this support to be attached and removed from sling upholstery and permit height adjustment.
Invacare Ulti-Mate Air & Ulti-Mate Air Pneumatic
The Invacare Ulti-Mate Air is a back supportcushion designed for use with wheelchairs. This back is anthropometrically contoured to promote good support and positioning of the spine. The seat-to-back angle can be adjusted from 90 to 115 degrees of recline. Quick-release hardware allows easy installation and portability. The Ultimate-Air Pneumatic also has a pneumatic lateral support.
Jay Active Back (Models 520, 522, 525, 527 & 528)
The Jay Active Back, models 520/522/525/527 & 528, is a back support cushion designed to provide comfort and stability for chair users. This contoured support cushion is composed of lightweight materials and features adjustable height and back angles designed to help relieve back pain. It also includes an "Air Exchange" cover designed to reduce perspiration and heat buildup. With a rigid back shell, this support cushion is not intended to bow or stretch. DIMENSIONS: All models feature adjust
Jay Back Cushion
The Jay Back is a foam and gel back support cushion designed to protect against scoliosis, kyphosis, instability, back pain, and skin breakdown. The cushion consists of an impact resistant ABS plastic shell with a middle layer of molded, contoured foam, and a Flolite spinal insert to prevent pressure problems on the spine. Flolite is a gel-like liquid that will conform to the user's body, but resists returning to its original position to prevent pressure on bony prominences. The water-resistant
Jay Combi Posture Seating System
The Jay Combi Posture Seating System consists of two foam cushions, one contoured, dual density seat cushion and one lumbar support back cushion, designed to reduce sitting fatigue, lower back pain, and slumping while promoting correct posture. COMBI SEAT CUSHION: The Combi seat is molded from two different kinds of foam. Inside is a contoured foam core that is firm, for support. Outside, a second layer of soft foam is added for comfort. The foundation resists compression from leaning to help pr
Jay Modular Back
The Jay Modular Back is a solid back insert made of aluminum that will accommodate either a Jay Custom Contoured Insert to fit deformities, or a Jay Standard Insert. The aluminum shell includes recline and depth adjustment, foam side guards, and clamp-on hardware. The Custom Contoured Insert includes a foam back with shim, full-width fluid pad, and an AirExchange cover. The Standard Insert includes a foam back with a spinal fluid pad and AirExchange cover. DIMENSIONS: Back shell is available in
Juni has a seat and backrest that promotes better posture for children who require minimal level of postural support when seated. The Juni chair comes with contoured seat and backrest, built-in lumbar support, pelvic strap, height and depth adjustable seat, height adjustable armrests as well as angle adjustable backrest as standard features. This chair can be used in the classroom or at home and comes in a variety of colors.
The K-Special Back is a wheelchair back support designed for use by individuals with mild to moderate kyphosis and/or weakness of the trunk. This padded fabric back replaces the standard wheelchair upholstery, has a smooth surface, and is shaped to accommodate and support the user's entire back, eliminating pressure from the apex of the curve and providing lateral support. This back is available in slip-on or screw-on styles to accommodate most wheelchairs. Folding wheelchairs can be folded with
Kensington Halfback Chair Pad
Kensington® Halfback® Chair Pad is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Chair pad has a molded plate and eggshell foam which encourages correct posture. Criss-cross elastic back straps are adjustable to fit all office chairs. It has a washable stretch Lycra slipcover.
The Key-Hole Back Support is a wheelchair back support designed for use by individuals with spinal curvature and other back disabilities. This back supports the user in an upright position, enhancing posture, visual field, respiratory function, balance and trunk support. The unit conforms to the individual body shape and a stretch fabric panel adjusts automatically to the severity of kyphosis, ensuring a custom fit. The user can change positions without sacrificing general support. Split back co
Lumbar And Sacral Support Dry Floatation Cushion
Neoprene rubber lumbar support cushion in two styles: standard design is 15 inches by 6 1/4 inches with 4 inch air cells; contour design is 15 inches by 6 1/4 inches with varying cell heights from 1 to 4 inches in height, made to fit specifications of user. May be used vertically or horizontally, and attach to chair with velcro strap. Weighs approximately 1 1/4 pounds. Sacral support cushion is custom designed to user's specifications, with cells varying from 1 to 4 inches in height. Easily atta
Lumbar Foam Cushion
The Lumbar Foam Cushion is a lumbar support designed for use by individuals in need of additional lower back support while sitting. Made of dense polyeyrethane foam, this cushion cradles the lower back offering additional support and stability. Features include a removable velour cover that fastens at the back of a chair with hook-and-loop fastener for desired positioning. The cover is machine washable. COLOR: The cover is beige.
Lumbar Massage Heating Pad
The Lumbar Massage Heating Pad is designed for individuals with a permanent or short-term disability that affects the lower back- specifically, the lumbar region. It also has a heat option, with two settings, that operates independently from the massage. Can be secured around the torso with adjustable hook-and-loop fasteners. Contains two massaging nodes that target the five lumbar vertebrae. Nodes vibrate to massage. Heat automatically shuts off after 20 minutes. The pad is operated with a teth
Custom size medium density foam pads with or without 1/2 inch birch plywood base. Mount to solid back in 3 ways: strapped on with cinch strap around solid back; velcroed to adhesive back velcro on pre- existing solid back; velcroed to back with velcro stitched into back upholstery prior to assembly. Adjustable in height by repositioning.
Lumbar Pillow Half Moon (Model 887)
The Lumbar Pillow Half Moon, model 887 is a back support designed for use by individuals with back pain or injury. Constructed of firm foam covered with black colored brush nylon, this back support provides support to the lower back when sitting in a car seat, chair, etc. The pillow is latex free and comes with a contact closure strap to help hold the pillow in position (not shown). DIMENSIONS (LxW): 11.5 x 2.5 inches. COLOR: Black.
The Lumbar Roll is a foam roll cushion designed to correct improper lumbar curve and assist in establishing correct sitting posture. The polyurethane foam roll comes standard with a washable polycotton cover. OPTIONS: Securement strap. DIMENSIONS: 4 inches in diameter x 14 inches long. COLOR: The cover is blue.
Lumbar Roll (Model N6002 & N6003)
The Lumbar Roll is a lumbar support designed for use by individuals in need of additional lower back support. Availabe in a half roll, model N6002, or a full roll, model N6003, these cushions have an attached strap to secure it in position. A cover is included. DIMENSIONS: Model N6002 is 2 x 12 inches and model N6003 is 4 x 12 inches. COLOR: Navy.
The Lumbar Support is designed for use by individuals with lower back pain, weakness, or injury. Made of medical-grade polyurethane foam, this half-roll support comes with a velour cover and fills the curve in the lower back created by sitting. The attached adjustable strap secures the support to mst desk chairs and car seats. DIMENSIONS: 14 x 6 x 3 inches. COLOR: The cover comes in navy, tan, charcoal, or black
Lumbar Support Cushion (Model F1412)
The Lumbar Support Cushion, model F1412, is a lumbar support designed for use by individuals in need of additional lower back support. Made of molded high-density foam, this cushion has an attached strap to secure it in position. A removable zippered cover is included. DIMENSIONS (WxH): 14 x 13 inches. COLOR: Navy, burgundy, and gray.
Elastic low back support. Attachment in front has two large grommets on each side of the closure tabs to insert fingers for good leverage in tightening the support. Velcro closure. /diamond shaped support in back with a removable silicone elastomer lumbosacral pad. 5 sizes fit waists 27.6 inches to 47.2 inches.
Magnetic Massage Lumbar Cushion (Model 9868)
The Magnetic Massage Lumbar Cushion, model 9868, is a combination massager and lumbar support designed for use by individuals with lower back pain and stiffness. Intended for home, office, or automobile use, this cushion features lumbar support for correct sitting posture, massage delivered by built-in massage motors, and four built-in bio-magnetic bars.
The MEDesign Backfriend is a back support cushion designed to prevent pain and discomfort associated with poor seating design at home, in the office, or travelling. Two models are available; both of which are portable, will fit into any chair, support both the lumbar and thoracic regions of the spine, give full adjustment of backrest inclination, and have a height adjustment to position the curve where the user needs it most. The Single Padded Model has a 1-inch polyether foam padding on both th
The Medic-Air Back-Pillo is an inflatable back cushion designed to provide back pain relief and long term sitting comfort for persons experiencing arthritis or back troubles. Engineered to support the curve of the lower back, this air-cushioned support adjusts to the user's needs with just a few puffs of air. It is designed with elastic straps that allows the user to fasten the pillow to the back of most chairs at the desired position. It also features three interconecting air chambers intended
Medic-Air Lumbar Roll
The Medic-Air Lumbar Roll is a back support, air-cushion designed to specifically fit the Lordotic curve of the lower back for persons experiencing lower back pain. Providing localized thrust and extension, this lumbar support is designed to fit any back and conform to any seat. It aims to provide back pain relief and long term sitting comfort. Adjustable by inflation, it also features a positioning strap and is deflatable for carrying in pocket or bag. DIMENSIONS (LxW): 20 x 7.5 inches. COLORS:
Medline Back Support (Models Mscbl16, Mscbl18, Mscbl20, Mscb16, Mscb18, & Mscb20)
The Medline Back Cushion is a wheelchair back support cushion designed for use by individuals with mobility disabilities. This support cushion fits in front of a standard wheelchair back, eliminating the hammock effect of a sling back. Straps hold the cushion in place. The cushion has two layers of high-density foam to support the entire back and a ShearX all-way stretch cover to reduce skin shear. The cover is antimicrobial and fluid-proof. It is available with or without lumbar support. SIZES:
Memory Foam Lumbar Support Back Rest (Model 7154Bl)
The Memory Foam Lumbar Support Backrest, model 7154BL, is a foam back support cushion designed for use to provide back support while sitting in a chair. This lumbar roll offers direct support for the lower back region. The cushion's polyurethane foam adapts to the natural contours of the user's back. It has adjustable straps to fit any chair. DIMENSIONS (HxDxW): 6.75 x 3.75 x 14.5 inches. WEIGHT: 2 pounds. COLOR: Black.
Memory Lumbar Cervical Cushion With Strap
The Memory Lumbar Cervical Cushion with Strap is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is made of memory foam designed to mold to individual body contours, offering support to the lumbar area and spinal column while sitting in a chair, car seat, or lying in bed. Features include a washable, removable polyester and cotton blend cover and positioning strap.
Mesa Back Supports
The M.E.S.A. Back Support is a lumbar support belt designed to aid in reducing back injuries resulting from lifting activities, particularly on the job. The belt gives abdominal and lower back support. All supports are made with shoulder straps and are machine washable. Styles include deluxe, premium, and power netting. OPTIONS: Belts without shoulder straps, metal stays, reflective tape, and company name/logo imprints. SIZE: Extra small to extra extra extra large and made-to-order sizes are ava
Modular Seat And Back Cushions
The Modular Seat and Back Cushions are designed to work with custom systems or replace standard wheelchair upholstery. The cushions ($68 and up) are made of foam, with an easy to clean skin surface. The back pads ($23 and up) may be installed permanently with glue, attached with velcro, or bolted to the seats with hardware.
Movin' Sit Air Cushion
The Movin'Sit Air Cushion is an air flotation seat cushion designed to give the user a slanted seat base to promote proper sitting posture. This adjustable, wedge-shaped cushion is inflatable, washable, and portable. It also functions as a dynamic surface, with small, rounded protrusions on one side to create air circulation. The unit may also be used as a lower back support. It is inflated by mouth and easily adjusted for any chair or surface. DIMENSIONS: 14 x 14 inches.
Multi Position Sleeping Pillow
The Multi Position Sleeping Pillow is a pillow and lumbar mat designed to support the cervical and lumbar spine. Useful for side, back and stomach sleepers. Supports the cervical and lumbar spine, and cushion knees and hips. Side Sleepers: Place the pillow between knees and the lumbar mat under lower back for spinal alignment. Back Sleepers: Place the pillow under neck and the lumbar mat under lower back to compensate for sagging mattresses. Stomach Sleepers: Place the pillow under one shoulder
The NE-AT Seat is a modular seating system of comfortable and supportive positioning pads designed for use in wheelchairs. Although each piece is available and can be used independently, the full NE-AT Seat comprises the NE-AT Seat, NE-AT Back, and NE-AT Headrest and is designed to fit into any mobility aid. The reusable and reshapable positioning pads are constructed of thick rubber bonded to nylon and filled with Styrofoam beads. This not only creates an airtight bladder, but adds cushionin
The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Intended for overnight use, this toll ties around the user's waist to provide lumbar support while lying down. DIMENSIONS: 36 x 4 inches for 24 to 34 inch waists or 42 x 4 inches for 34.5 to 40 inch waists.
The OBUS Forme is a back support cushion designed to provide proper spinal support in any chair, auto seat, sofa, or bed. This support conforms to the natural contours of the spine to guide the back into a correct anatomical position, allowing it to relax. This posture eliminates lateral pressure on the spine to reduce fatigue and discomfort and to provide support for the upper rib cavity. The support is available in high- or low-back models and can be fitted with an optional lumbar pad for extr
Obus Supporting Roll
The OBUS Supporting Roll is a cylindrical pillow designed to provide support to either the lower back (lumbar area) or the neck (cervical area). This roll can be used in a chair or car seat. An elastic strap is included to hold the pillow in the desired position. The fabric cover can be removed and cleaned. DIMENSIONS: 12 inches wide, 4 inches in diameter. COLOR: Black, brown, burgundy, camel, grey, green, taupe, and two shades of blue.
Obusforme Highback Backrest Support
The ObusForme Highback Backrest Support is a back support cushion designed for use by individuals with back pain or individuals who spend long hours sitting. Designed to support the head, neck, and lower back, this polycarbonate S-shaped frame conforms and supports the natural contours of the back both laterally and horizontally. The frame of the backrest is covered with three layers of polyurethane foam that can be removed and sponge washed. The support also has a removable and adjustable lumb
Original Mckenzie Airback Roll (Model 706)
The McKenzie Airback Roll, model 706, is an inflatable back support cushion designed for individuals with low back pain, injury, or arthritis. Constructed of nylon-covered vinyl, this portable lumbar roll can be adjusted for firmness by increasing or decreasing inflation. The roll can be deflated and folded for transport in a wallet, pocket, or purse.
Original Mckenzie Cpm Roll (Model 709)
The Original McKenzie CPM Roll, model 709, is a lumbar support designed for use by individuals with lower back pain, weakness, or injury. This support also offers continuous passive motion to the lower back, inflating and deflating every 40 seconds. Continuous passive motion helps increase lower back flexibility and reduces muscle fatigue. The cushion includes a strap to secure it to a car seat or chair. POWER: Uses a car cigarette lighter adapter (included). An optional alternating current (AC)
Original Mckenzie D-Section Lumbar Roll (Model 700)
The Original McKenzie D-Section Lumbar Roll, model 700, is a back support cushion designed for use by individuals with lower back arthritis, injuries, or disabilities. This cushion features a D-shaped design intended to provide back support for the reduction of postural stress on the lumbar discs. Made of foam with a washable polyester cover, this roll secures to chairs and automobile seats with permanently attached adjustable elastic straps.
Original Mckenzie Lumbar Roll
The Original McKenzie Lumbar Roll is a back and lumbar support cushion designed to relieve back pain for individuals who have difficulty sitting for long periods. This portable lumbar roll supports the natural curve of the spine in all seating conditions. Designed with adjustable elastic straps, this roll made of foam and fits most chairs. DIMENSIONS (LxD): 11 x 5 inches. The straps are 38.5 inches long.
Original Mckenzie Lumbar Roll (Models 701 & 702) And Original Mckenzie Early Compliance Lumbar Roll (Model 704)
The McKenzie Lumbar Roll is a back support cushion designed for use by individuals with lower back pain, injury, or arthritis. Designed to support the lumbar lordosis while sitting this padded foam tube is placed between the curve of the lower back and the chair. A detachable elastic strap allows the roll to be worn around the waist or strapped to a chair. The roll's materials are washable. Model 701 is standard density and Model 702 is firm density. The Original McKenzie Early Compliance Lumba
Original Mckenzie Night Roll (Models 750, 751, & 752)
The Original McKenzie Night Roll is a back support cushion designed for use by individuals with lower back arthritis, pain, or injury. This roll provides back support for the lumbar region while the user is lying on his/her side or back. Made of foam with a removable, washable cotton and polyester cover, this roll ties around the waist. SIZES: Model 750 is extra small (fits waists up to 24 inches), model 751 is small/medium (fits waists 24 to 34 inches), and model 752 is large/extra large (fits
Original Mckenzie Super Roll (Model 708)
The McKenzie Super Roll, model 708, is a back support cushion designedfor use by individuals with lower back pain, arthritis, or injury. Made of foam with a velour cover, this roll features a removable elastic strap that can be attached to a high or low back chair and car seats. A Velcro strip sewn on the cover also enables direct attachment to fabric chair backs.
The Orthopod is a low back orthosis and full back cushion designed to provide the user with the precise spinal pressures at various points on the back. The cushion may be used by individuals suffering from low back pain, arthritis, post spinal surgery pain, post laminectomy/spinal fusion, various spinal disc conditions, and sciatica. The support is portable and may be used when driving or travelling by car, bus, truck, etc., or at work. Two models are available: a High Back and a Low Back.
PaxBac is a wheelchair back support designed to promote a more upright posture and to provide the proper amount of back support for wheelchair users with sling-back chairs. Made of molded foam, the unit fastens to the back of most sling back chairs with built-in attachment hooks. A tension strap allows the user to increase or decrease the amount of support provided to meet the differing needs of various activities. A loop handle on the tension strap enables the user to make adjustments while rem
Posture Corrective Brace
The Posture Corrective Brace is a back brace designed for use by individuals who have a disability, like osteoporosis and postural disturbances or a condition that causes hunching or slouching, and designed to return those individuals’ back to a healthier stature. Reduces lower back pain, slouching, and hunching. Holds shoulder and back in a healthier position. Easily adjustable hook-and-loop closure increases and decreases the amount of support and pressure. Soft, non-elastic straps provide a s
Posture Curve Lumbar Cushions
The Posture Curve Lumbar Cushions are back support cushions designed to provides support vertically and laterally to the lumbar (lower back) area. The cushions are available with a strap to fasten to a seat at at the desired height. Models 102 or 103 for curved bucket seats of cars fit the inside width with angled back corners to go between the wings or bolsters at each end of the seat. The zippered covers are available in plaid or solid, velour or Merino wool.
Pro Forma Matrix Wheelchair Seating And Positioning
Pro Forma Matrix Wheelchair Seating and Positioning are custom wheelchair back and seat supports designed for use by individuals who use wheelchairs. This system offers offers total body contouring and wheelchair backs is light and strong, making custom wheelchair seating and positioning quicker and easier. The Pro Forma Matrix can be fitted to a wide range of users as preformed Direct Wheelchair Backs or Full Body Wheelchair Seating. The Pro Forma Matrix is supplied as rectangular sheets, pre-f
Quick Release Back (Model 102-7000)
Solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Quick release brackets fit 3/4 inch, 7/8 inch and 1 inch tubing. Bracket has a latch that pivots for easy quick release. Comes with multi-adjustable brackets. Backs are cut to fit between the rails.
Recaro is a car seat designed for use with children weighing 9-36 kilograms with balance, neurological, or other physical disabilities. It is made out of an aluminum frame and offers additional contoured seat padding, lateral support and adjustability. Additional features include anatomical seat padding with leg support and an adjustable back height and seat depth. The width of the shoulder pads is adjustable and it comes with a standard 5-point safety harness with simplified central adjustmen
Relaxo-Bak Comfort Seat
Relaxo-Bak Comfort Seat is a back support cushion designed for use by individuals with back pain. This form fitting plastic auxiliary seat, can be used over any soft seat for added firmness. Allows body weight to be carried on the lowest part of the pelvis. Pressure is taken off the coccyx to prevent switching and tightening of the back muscles. Molded plastic, recessed at spinal end to protect coccyx. COLORS: Black, Gray, Tan, Burgundy, Off-White, or Sky Blue.
Remedease Full Height Backrest (Model 71301)
The Remedease Full Height Backrest, model 71301, is a foam back cushion designed for use to add back support to any chair. This over-sized backrest contains high-density medical-grade, anti-allergenic foam that keeps its shape to support the user for long periods of time. An elastic strap on the cushion adjusts to fit any chair and holds the backrest firmly and securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover. DIMNESIO
Remedease High Profile Backrest (Model 71491)
The Remedease High Profile Backrest, model 71491, is a foam back cushion designed to add lower back support to a work chair. This cushion supports the user's lower back with high-density, anti-allergenic foam that keeps its shape. The cushion's elastic strap adjusts to fit any chair and holds the cushion securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover, DIMENSIONS (HxDxW): 13 x 4 x 12.75 inches. WEIGHT: 1 pound. COLOR:
Remedease Lumbar Roll (Model 71101)
The Remedease Lumbar Roll, model 71101, is a lumbar support and foam back cushion designed to reduce back strain. This high-density foam cushion attaches to the back of a chair and provides direct support to the user's lumbar area. Its high-density anti-allergenic foam keeps its shape for long periods of time. An elastic strap adjusts to fit any chair and holds the backrest firmly in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cove
The Retroback is a foam wheelchair back support designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. This cushion is lightweight and durable and is equipped with a chrome-plated steel clip that attaches to the existing sling upholstery. Removing the Retroback is done by simply lifting it off the upholstery. The cushion also features a nylon/polyester water-resistant, machine-washable cover. DIMENSIONS: Available in 16, 18, or 20 inch
Roho Pack It
Lightweight neoprene rubber air cushion made of Mini Max cells, which are 1 1/4 inch high flexible air cells. Standard size is 16 inches by 9 1/2 inches, but can be customized to fit any size requirements. Encased in removeable two way stretch cover with elastic strap. Weighs approximately 1 1/4 pounds. 18 month warranty. Can be used for scapular, sacral, lumbar support, in shower or bathtub, automobile, airplane. Designed for lightweight travel use.
Rolyan Workhard Back Support (Models A81831 To A81835)
The Rolyan Workhard Back Support, models A81831 to A81835, is a heavy duty lumbar support aid designed to act as a preventive measure for persons with low back pain. With double waist strapping, it is constructed to provide both lumbar and adominal support. This brace also features adjustable shoulder straps and is not designed to constrict the user's daily activities. DIMENSIONS: Measure around waist - do not use pant size. Model A81831 - Small is 26 to 30 inches wide; Model A81832 - Medium is
The Sacral Dish is a back support cushion designed for use in wheelchairs by those who in wheelchairs who are at risk for sacral coccygeal pressure ulcers. This cushion's semi-rigid base and unique shape provide a supportive foundation to fill in the chair's back upholstery while offering pressure-free ventilated protection of the sacrum. The support straps to the existing seat back and can be used alone or with the ISCH-DISH (see separate entry) or other seating products. This support comes com
Sacro Ease (Models Bwc, Bwcs, Wc & Wcs)
The Sacro-Ease, Model BWC, BWCS, WC and WCS, seat supports are designed to provide individuals in a wheelchair support under the hips and behind the lumbar spine. Models BWC and BWCS feature a backrest that clamps to wheelchair upright. Models WC and WCS are seats only. The seat supports for all models are made of two one-inch polyfoam cushions with steel frame and latex rubber support bands between the layers of foam. The foam is covered with a removable, washable and waterproof cover. The diff
Sacro Ease (Models Rcrx, Rscrx, Rncrx, Brc-Rx, Brsc-Rxm & Brnc-Rx)
The Sacro-Ease, models RCRX, RSCRX, RNCRX, BRC-RX, BRSC-RXM and BRNC-RX, are seat supports designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. The RCRX, RSCRX, RNCRX models are only seat cushions only that have a cutout at the center rear of the seat. These cushions have 1 inch of high density foam with a steel frame. The BRC-RX, BRSC-RXM and BRNC-RX feature a backrest with an adjustable lumbar support cushion mounted with th
Sacro Ease Keri Back Cushion (Models Kbt & Kbn)
The Sacro Ease Keri Back Cushion, models KBT and KBN, is a back support cushion designed to reduce back fatigue, ease lower back pain for individuals who have back injuries or posture problems. Designed for taller users, this back support cushion has a steel frame, rubber and 1 inch of memory foam in the back. It is bendable for additional support and has a four way strapping system to fit most office chairs and car seats. DIMENSIONS (HxW): 18 x (15 or 12) inches. WEIGHT: 5 pounds. COLORS: Bla
Sacro Ease Sports Portable
The Sacro-Ease Sports Portable is a seat and back support designed for use at spectator sports events. The seat support may be used with or without the existing backrest. The seat closes to be carried like a briefcase. The seat support is manufactured with .5 inch of polyfoam on top of a bendable carbon steel frame with rubber supports. The upholstery is water-resistant fabric. The back support has a built-in lumbar support pad. The Sports Portable has a non-skid bottom, and it is available with
Sacro Ease Standard (Models Br, Brsm & Brn)
The Sacro Ease Standard, models BR, BRSM and BRN, is a back support cushion are designed for office chairs and auto and truck bucket seats with existing firm bottoms. This product features a seat bottom and backrest with adjustable lumbar pad on a foldable steel frame with rubber strap supports and a non-skid bottom. The Sacro Ease Standard provides support under the hips and behind the lumbar spine. The units are designed to fit to the individual and not the seat, thus the unit can be moved fro
Schukra Adjustable Backrests
The SCHUKRA Adjustable Backrest is a back support cushion designed to help ease back pain. Providing threefold support in the pelvis, lumbar and upper body regions, this support aid adjusts to fit the user's spinal column while sitting. Adjustments are made with a small dial found at the bottom-side of the cushion. With its compact design, it can be used in the car, home or office. COLOR: Variety. WARRANTY: Lifetime - for the original purchaser.
Seat2GO is a floor seat designed for children who need extra support while seated. Contoured seat prevents user from sliding forward. Improves seating posture. Features 95 degree seat to back angle and double strap trunk support and belt.
Sidehugger Back Cushion
The SideHugger Back Cushion is a back support cushion designed for use by individuals with mobility disabilities. The cushion attaches directly to the existing wheelchair back and hugs the user when leaned against, encouraging the user to position him/herself using the built-in lateral supports. DIMENSIONS (WxH): Standard and tall models are available for 16-, 18-, and 20-inch chairs.
Sideminder Wheelchair Back (Models Mdtsm16, Mdtsm18, & Mdtsm20)
The SideMinder Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, or upper extremity disabilities. This steel replacement back features up-and-down and side-to-side adjustments that provide lateral support to prevent leaning to one side. This back adapts to fit non-standard size chairs. OPTIONS: Available with or without lateral supports and headrest. SIZES: Avialable for 16-inch seat (model MDTSM16), 18-inch seat (mo
Sit'n Easy Inflatable Back Cushion (Model Ez-1)
The Sit'N Easy Inflatable Back Cushion, EZ-1, is a back support cushion designed to provide proper back support to the lumbar (lower back) area. The cushion is covered in a flocked material and deflates for transport or storage. DIMENSIONS: 15 x 15 inches.
Skate Mesh Ergonomic Chair
The Skate Mesh Ergonomic Chair is an ergonomic chair designed for use to provide back support while working at a desk to reduce back stress. The Ergonomic Chair has a Sub-skating recline mechanism that enables constant contact between lumbar region and chair back. Soft pad adjustable arm rest with pivot. Seat and back adjust simultaneously. Meets or exceeds all ANSI/BIFMA standards.
Softspot Low Profile Back Rest (Model 7151Bl)
The SoftSpot Low Profile Backrest, model 7151BL, is a back support cushion designed for use to reduce back strain while sitting for long periods. This polyurethane foam backrest cushions and supports the lower back and spine, reducing strain and fatigue. Its upper edges are curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape and provides support. The surface is non-ab
Softspot Lumbar Roll Backrest (Model 7150Bl)
The SoftSpot Lumbar Roll Backrest, model 7150BL, is a back support cushion designed for use to improve comfort and posture for individuals who sit in a chair for long periods. This polyurethane foam cushion provides direct support for the lumbar region. The upper edges are softly curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape to maximize support. The surface is n
Custom size solid back with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and headrest mounting. Custom foams available. Modifications available include curved solid back and I-back cutout. May be ordered without aluminum hardware, or mounted to chair with velcro loops, cinch straps, stationary knob-release hardware, adjustable knob-release hardware, non-adjustable drop hooks, or adjustable drop hooks. Hardware m
Solid Back Insert (Model 75)
The Solid Back Insert, model 75, is designed for use in wheelchairs with sling upholstery and push handles. The insert features a rigid base with a foam liner, a fabric cover, and loops to secure it to the wheelchair push handles
Solid Backs (Models 102-1000, 102-2000, 102-3000, 102-4000, 102-5000, & 102-6000)
Adaptive solid seat backs with 1/2 inch plywood bases, 1/2 inch foam padding and Naugahyde, shelterite or synthetic lambswool covers. Available in any size, with or without mounting hardware. Modifications available include cutouts, extra or special foam, curved back, I-back, wedge cut.
Solid Seat And Back
Solid seat and back inserts. Hardwood plywood base with firm foam padding. Naugahyde cover. Various hardware styles and clamps attach units to wheelchair. Customized to fit any wheelchair frame; manual, power drive, travel chair or sport chair. Back insert models: T-back, R- back or with straps.
Solid Seat With Attaching Hardware (Model Ee1) & Solid Back (Model Ee2)
Solid seat and back, 1/2 inch marine grade plywood and 1 1/2 inches of foam padding. Hardware is designed to allow adjustment of seat to back angle, seating depth and flexion. Naugahyde upholstery. Full of cushion is rounded. Custom widths.
The Spine Align is a lumbar support cushion designed to be used as a lower back support for people with chronic sitting pain or who must sit for long periods at a time and who require additional support at the lumbo sacral curve. The cushion features a convex back, a soft center channel and a moisture resistant Cordura nylon cover. The portable cushion attaches with Velcro straps to a wheelchair, car seat, or office chair. DIMENSIONS (HxWxD): 5 x 13 x 2.25 inches thick at the center. WEIGHT: 5 o
Spine Ease Deluxe Massage Pillow (Model Sp-1)
The Spine Ease Deluxe Massage Pillow, SP-1, is a vibrating lumbar support cushion designed to reduce lower back discomfort. This portable pillow can be used anywhere - in the home, office, or car. POWER: Battery operated on 2 "D" batteries (not included). DIMENSIONS: 14.5 x 15 inches.
Spine Reliever Back Support Bed Wedge
The Spine Reliever Back Support Bed Wedge is a backrest designed for use by individuals with back pain, weakness, or injury. This wedge is topped by memory foam that contours to the user's body and enables the user to sit upright in bed or use it in two reclining positions. An adjustable neck roll is included.
Standard And Trisectional Lumbar Cushions
The Standard and Trisectional Lumbar Cushions are back support cushions designed to provide support for those who must remain seated for long periods. The Trisectional Cushion is designed with an elevated center to provide support in three planes: vertical, lateral, and direct lumbar area. The standard cushion has a full contour without an elevated center. A washable cover is standard on both models. Both models are available with or without a Masonite insert for rigid support and a securement s
Stimulite Slimline Cushion
The Stimulite Slimline Cushion is a foam seat cushions designed for use in wheelchairs. This cushion is made of three layers of honeycomb material, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The cushion is machine washable and dryer safe. The cushion is available with a flat or sling bottom and with a polyester or sheepskin cover. DIMENSIONS (WxD): 14 x 16, 16 x 16, 16 x 18, 18
Straighten Up Posture Aid
The Straighten Up Posture Aid is a back and shoulder brace designed for office workers, travelers, video gamers, students, breast-feeding mothers and golfers,or for individuals with slouching, hunching, and more debilitating conditions, like Osteoporosis. Product retrains, realigns and relaxes the wearer to avoid slouching, hunching and stress.
Straighten Up Posture Aid
The Straighten Up Posture Aid is for persons with a back injury, a disease, condition, or upper extremity disability that causes poor posture. This device helps these persons, retrains, realigns and relaxes the wearer to avoid slouching, hunching and stress. Special sizing.
T Mods (Mod J)
Solid back insert modification for any Freedom Design solid backs. Backs are cut in the shape of a "T" to permit maximum adjustability of trunk supports. Only works with Econo-Ease Hardware.
Temp Back Supporter & (Models 5311, 5321, 5341, & 5301) & Half Back Wedge (Model 54000)
Contoured lower back support with cutout for hot or cold pack insertion. Velcro closure. Polyurethane foam. Washable corduroy covers. Loop fasteners for chair mounting. Available with or without: hot pack; cold pack; hot and cold pack. Black, Navy, Grey, or Turquoise. Half- back wedge is 12 by 14 inches. Navy.
TFH Resonance Cushion (Model 9Rscn)
The Resonance Cushion, model 9RSCN, is a vibrotactile amplification system designed for use with children and adults with neurological, emotional, or cognitive disabilities. This cushion can be used in a standars chair or a wheelchair and features a built-in amplifier with cables to connect to the television or a stereo system rated from ten to one hundred watts of power. DIMENSIONS (HxWxD). 18 x 13 x 4 inches.
The Hugster is a pillow designed for a variety of uses such as nursing, pregnancy, infant support, TV/reading, sleeping and back support. It is horsesoe shaped with a velcro fastener that hugs the user. This pillow is made of 100% polyester filling with a cover that is 100% cotton.
The Thera-P-Back Cushion is a lumbar cervical support designed for use by individuals with lower back and neck pain. This cushion is fully adjustable and designed to help eliminate lower back pain and neck pain while at home, in a car, or at the office. One side is shaped to provide support to lumbar area, and the reverse side is to provide support and comfort to the neck. Features include adjustable Velcro straps and a reusable hot/cold compress. The entire cushion can be micro-waved or place
Assorted cushions for lumbar or cervical support. Lumbar cushion with saddle hug wings or inverted edges, fits bench or bucket seats. Small dorsi-lumbar cushion 15 by 15 inches square. Large dorsi-lumbar cushion 15 by 19 inches. Lumbar cushions are firm foam with velvet covers. 21 inch twin lobe cervical pillow with smooth or convoluted texture, medium soft foam. Cervical roll 18 by 6 1/2 inches, medium soft polyester fiber. Zippered covers. Assorted colors.
Tms Slat Back (Models 2210, 2010, 2208, & 2208)
Alternative to solid back insert or soft back cushion. Slatted, padded back inserts provide stabilty without the rigidity of a solid back insert. Can also be used as a back extension providing 2 to 4 inches over the standard upholstery. A non-skid extension lays flat on the wheelchair seat, or under a seat cushion to prevent the back cushion from shifting. Standard adult (2210) 22 inches high, 10 slats wide. Standard adult (2210) 20 inches high, 10 slats wide. Narrow adult ( 2208) 22 inches hgih
Tms Solids, Solid Insert Seats And Backs
Solid seat and back inserts. Plywood base with padded foam and vinyl cover. Available in standard adult, narrow adult. Fits over regular seat and back. Back secured over push handles with fabric loops.
Topside Junior Support
The Topside Junior Support is designed to help users with maintenance and repair tasks in a vehicle engine compartment without straining their backs. Intended users are those with lower back injuries, aging back, back pain, spinal injuries, mobility impairment, arthritics, core stability, chronic fatigue syndrome, fibromyalgia, herniated disc, lumbar/low back pain, ruptured disc, scoliosis-kyphosis-lordosis. This relieves strain on the lower back. Many engine repair tasks require the user to str
Travelin' Toddler's Car Cushion
The Travelin' Toddler's Car Cushion is a head support, polybag cushion designed to offer support and comfort while sleeping for children when traveling. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.
Tush-Cush & Car-Cush
The Tush-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, the cushion has a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable cover. The Car-Cush is a smaller version of the Tush-Cush and offers the same features. The Tush-Cush is available with a choice of a velour cover, a coated vinyl generaltional fabric cover, or a faux leather c
U Form Deep Contour Back
The U Form Deep Contour Back is a foam back support cushion for use on wheelchairs. The segmented foam structure is available in multiple configurations allowing the back cushion to be built to meet the user's requirements. Sections can be removed, exchanged with other foam densities or removed to accommodate specific positioning needs. The segmented foam structure is formed with an additional 0.75-inch topper for added comfort and transition between the outer cover and the firmer inner foam seg
Varilite Backrest & Varilite Split Backrest
The Varilite BackRest and Split BackRest are inflatable back support cushions designed for use by individuals with mobility disabilities, spinal cord injury, and others who need back support. The cushions offer lower lumbar support and promote spinal extension during wheelchair use, extended car rides, air travel, and in office chairs. Support encourages upright sitting posture and decrease muscle fatigue. Cushions have a mesh cover with reticulated foam that wicks moisture away from the skin. A
Wheelchair Back Support
The Wheelchair Back Support is a lumbar back support cushion designed to provide firm back support for wheelchair users. Covered in stain-resistant velour, the half-moon-shaped support is formed of quick-recovery foam and attaches to the wheelchair using loop handles. DIMENSIONS (LxWxD): 16 x 8 x 3 inches.
Wheelchair Convex Back Support
The Wheelchair Convex Back Support is a curved back insert designed for use in wheelchairs with sling upholstery. This support compansates for the tendency of sling upholstery to gap and improves support and pressure distribution by molding to the user's back. Made of high-density foam with softer foam on the front surface, this support featires a built-in lumbar roll and ties to the wheelchair back uprights. DIMENSIONS: 16 x 16 inches.
Wheelchair Lumbar Support(Models 703065 & 703066)
The Wheelchair Lumbar Support is a lumbar support designed for use in wheelchairs. The foam core is covered in easy-clean vinyl. The attached straps hold the support securely in place. Model 703065 is a half-round and model 703066 is a full-round. SIZES: One size fits 16- and 18-inch chairs. DIMENSIONS: The half-round is 2.5 inches in diameter and the full-round is 5 inches in diameter.
Wheelnest Seating System
The WheelNest Seating System is a portable system for prolonged, balanced seating in wheelchairs, cars, office or other chairs that has a molded seat, solid seat and solid back inserts, and gel flotation seat cushion. WheelNest provides a balanced underseating as well as lumbar back support; helps maintain proper lordosis (curvature of the spine), correct hip position and proper spine alignment; and helps prevent decubitus ulcers. BACK SUPPORT: The back support is made of padded, contoured layer
Wing Back Support
The Wing Back Support is a back support cushion designed for use by individuals with back pain, weakness, or injury. This support can be used in standard chairs, office chairs, or on car seats and provides lateral support for correct posture as well as lower back support. This cushion is available in polyurethane foam, six-pound VitalFoam Memory foam, or Memory Lite foam, and all models include an adjustable strap to secure the cushion to a car seat. DIMENSIONS: The polyurethane foam model is 1
Workmod Back Support (Model Nc73585)
The WorkMod Back Support, model NC73585, provides firm lower back support and encourages correct sitting position and posture, eliminating discomfort and fatigue. The cushion can be used on any type of chair and is designed to stay in place during use.
Yogaback Posture Cushion For Driving
The YogaBack Posture Cushion for Driving is a back support cushion designed for use by drivers with lower back pain. This polyethylene foam cushion features sacral and thoracic pads that attach with Velcro to the inside back surface of the cushion's fabric cover. The pads are infinitely height adjustable. The cushion has a slim profile so the user will not be pressed forward in the car seat. The cushion's depth is adjustable with a choice of two different pad thicknesses. The cushion comes with