Material: 3D printed parts.
Battery: Rechargeable Lion Battery pack.
Control: Control car transmitter.
Light: Flashing light lamp siren home security wired sound alarm
Button: One click on and one click off.
Stable:Yes, soldered and glued.
Color: White, red and blue.
Electronic components: Control Transmitter, Rechargeable lion Battery pack, and a flashing light lamp siren home security wired sound alarm.
Assembly components: First take the battery pack and strip back the wire to the male connector and tin them with a soldering iron. Next take the light and siren out of the flasher and wire it up to the output on the relay module. Next take the stripped end of the battery connector and connect the proper polarity of wire to the power input on the relay module.
Now take the clear red cross (you can print it in clear then color the inside red with sharpie) and glue it where it rests snugly to the out side of the case.Then take all the electronics and hot glue them in place. (the switch on the battery fits in the rectangle on the bottom and the female end can fit in the circle cut out on the side.) make sure the light is in the red cross. Follow the instructions with the relay to make sure the button is set to one click on one click off. Test it then if everything works screw or glue the back on and place it where every or with who every you can trust will help.